IPB

Bienvenue invité ( Connexion | Inscription )

3 Pages V  < 1 2 3  
Reply to this topicStart new topic
> SDD disparu après formatage, Clean Install sur MacBook Air 6,1
Options
jeanjd63
posté 24 Apr 2020, 08:58
Message #61


Macbidouilleur d'Or !
*****

Groupe : Membres
Messages : 11 698
Inscrit : 15 Nov 2007
Lieu : Auvergne-Rhône-Alpe.
Membre no 99 922



Hello.

Que te renvoie la commande :

Code
/usr/libexec/firmwarecheckers/eficheck/eficheck --integrity-check


Comme j'ai l'impression que la commande bless ci-dessus écrit le firmware sur la partition EFI du SSD interne, il faudrait tenter de :
1) démonter ce SSD avant de passer la commande :

Code
diskutil umountdisk force disk0


puis la repasser.

Si l'écriture du Firm se fait toujours sur la partition EFI du SSD interne, il faudrait démonter ce SSD, puis recommencer.

Ce n'est qu'au démarrage qui suivra cette commande bless que la mise à jour du Firm devrait se faire.
Go to the top of the page
 
+Quote Post
BBarkes
posté 24 Apr 2020, 11:05
Message #62


Adepte de Macbidouille
*

Groupe : Membres
Messages : 68
Inscrit : 7 Feb 2017
Lieu : Planet Marseille
Membre no 201 138



Bonjour, OK, voilà les réponses:
Code
Last login: Fri Apr 24 11:53:34 on console
MacBook-Air:~ acu$ /usr/libexec/firmwarecheckers/eficheck/eficheck --integrity-check
EFI Version: MBA61.88Z.0099.B20.1509081314
Matching allowlist not found in EFIAllowListShipping. Searching in EFIAllowListAll.
Fetching allowlist data update.
Waiting for allowlist data download to complete.

Allowlist data update finished.
Primary allowlist version match found. No changes detected in primary hashes.
MacBook-Air:~ acu$
MacBook-Air:~ acu$


Code
Last login: Fri Apr 24 11:55:39 on ttys000
MacBook-Air:~ acu$ diskutil umountdisk force disk0
Forced unmount of all volumes on disk0 was successful
MacBook-Air:~ acu$


Code
Last login: Fri Apr 24 11:57:55 on ttys001
MacBook-Air:~ acu$ sudo bless --mount / --firmware ~/Desktop/MBA61_0107_B00.scap --verbose --recovery
Password:
EFI found at IODeviceTree:/efi
Will need to copy 8523776 bytes to EFI system partition
GPT detected
No auxiliary booter partition required
System partition found
Preferred system partition found: disk0s1
Returning booter information dictionary:
<CFBasicHash 0x7f8fd2d0fa60 [0x7fff8f52daf0]>{type = mutable dict, count = 3,
entries =>
    0 : <CFString 0x10f367be0 [0x7fff8f52daf0]>{contents = "System Partitions"} = (
    disk0s1,
    disk1s1
)
    1 : <CFString 0x10f3683c0 [0x7fff8f52daf0]>{contents = "Data Partitions"} = (
    disk1s2
)
    2 : <CFString 0x10f3683e0 [0x7fff8f52daf0]>{contents = "Auxiliary Partitions"} = (
)
}

Substituting ESP disk0s1
Mounting at /Volumes/bless.7LR7
Executing "/sbin/mount"
Returned 0
Creating /Volumes/bless.7LR7/EFI/APPLE/FIRMWARE if needed
Deleting previous contents of /Volumes/bless.7LR7/EFI/APPLE/FIRMWARE
Deleting /Volumes/bless.7LR7/EFI/APPLE/FIRMWARE/MBA61_0107_B00.scap (8520304 bytes)
Opened dest at /Volumes/bless.7LR7/EFI/APPLE/FIRMWARE/MBA61_0107_B00.scap for writing
preallocation not supported on this filesystem for /Volumes/bless.7LR7/EFI/APPLE/FIRMWARE/MBA61_0107_B00.scap

/Volumes/bless.7LR7/EFI/APPLE/FIRMWARE/MBA61_0107_B00.scap created successfully
Relative path of /Volumes/bless.7LR7/EFI/APPLE/FIRMWARE/MBA61_0107_B00.scap is \EFI\APPLE\FIRMWARE\MBA61_0107_B00.scap
IOMedia disk0s1 has UUID 3ED89E1A-7A0B-4F44-BC05-6775E4647870
Executing "/sbin/umount"
Returned 0
Write to RTC: 0
Setting EFI NVRAM:
<CFBasicHash 0x7f8fd2c00830 [0x7fff8f52daf0]>{type = mutable dict, count = 1,
entries =>
    2 : <CFString 0x10f367c20 [0x7fff8f52daf0]>{contents = "efi-apple-recovery"} = <CFString 0x7f8fd2f00620 [0x7fff8f52daf0]>{contents = "<array><dict><key>IOMatch</key><dict><key>IOProviderClass</key><string>IOMedia</string><key>IOPropertyMatch</key><dict><key>UUID</key><string>3ED89E1A-7A0B-4F44-BC05-6775E4647870</string></dict></dict><key>BLLastBSDName</key><string>disk0s1</string></dict><dict><key>IOEFIDevicePathType</key><string>MediaFilePath</string><key>Path</key><string>\EFI\APPLE\FIRMWARE\MBA61_0107_B00.scap</string></dict></array>"}
}

MacBook-Air:~ acu$


Citation (jeanjd63 @ 24 Apr 2020, 09:58) *
Si l'écriture du Firm se fait toujours sur la partition EFI du SSD interne, il faudrait démonter ce SSD, puis recommencer.

Ce n'est qu'au démarrage qui suivra cette commande bless que la mise à jour du Firm devrait se faire.


Là, on parle de démonter physiquement le SSD interne, c'est bien ça ?


--------------------
IMack: GIGABYTE GA-H97M-D3H / INTEL - Core i5-4690 - 3,5 GHz / BALLISTIX - tecnical 16 Go 2 x 8 Go DDR3 1600 MHz / SSD Samsung 870 EVO 500 Go / Corsair CS550M / macOS 12.6.8 / Clover5156
MackBook Pro: HP ProBook G5 / i5-8250U / UHD 620/GTX 930MX, 1920x1080 / RAM 8 Go 2400 MHz DDR4 /SSD Samsung 860 EVO M.2 250 GB / Broadcom-bcm94352z / macOS 10.14.5 / Clover
IMack: GIGABYTE GA-H97M-D3H / INTEL - Core i5-4690 - 3,5 GHz / BALLISTIX - tecnical 16 Go 2 x 8 Go DDR3 1600 MHz / SSD Samsung 850 EVO 250 Go / Corsair CS550M / OS X 10.10.5 / Clover
Mac Book 2007 1,83 GHz Intel Core 2 Duo, OS X 10.6.8
Go to the top of the page
 
+Quote Post
jeanjd63
posté 24 Apr 2020, 12:05
Message #63


Macbidouilleur d'Or !
*****

Groupe : Membres
Messages : 11 698
Inscrit : 15 Nov 2007
Lieu : Auvergne-Rhône-Alpe.
Membre no 99 922



On va vérifier.

Tu vas taper la commande :

Code
sudo diskutil mount disk0s1


puis

Code
ls -l /Volumes/EFI/EFI/APPLE/FIRMWARE


et donner les retours
Go to the top of the page
 
+Quote Post
BBarkes
posté 24 Apr 2020, 13:58
Message #64


Adepte de Macbidouille
*

Groupe : Membres
Messages : 68
Inscrit : 7 Feb 2017
Lieu : Planet Marseille
Membre no 201 138



Code
Last login: Fri Apr 24 11:59:40 on ttys002
MacBook-Air:~ acu$ sudo diskutil mount disk0s1
Password:
Volume EFI on disk0s1 mounted
MacBook-Air:~ acu$ ls -l /Volumes/EFI/EFI/APPLE/FIRMWARE
total 16642
-rwxrwxrwx  1 acu  staff  8520304 24 avr 11:59 MBA61_0107_B00.scap
MacBook-Air:~ acu$


--------------------
IMack: GIGABYTE GA-H97M-D3H / INTEL - Core i5-4690 - 3,5 GHz / BALLISTIX - tecnical 16 Go 2 x 8 Go DDR3 1600 MHz / SSD Samsung 870 EVO 500 Go / Corsair CS550M / macOS 12.6.8 / Clover5156
MackBook Pro: HP ProBook G5 / i5-8250U / UHD 620/GTX 930MX, 1920x1080 / RAM 8 Go 2400 MHz DDR4 /SSD Samsung 860 EVO M.2 250 GB / Broadcom-bcm94352z / macOS 10.14.5 / Clover
IMack: GIGABYTE GA-H97M-D3H / INTEL - Core i5-4690 - 3,5 GHz / BALLISTIX - tecnical 16 Go 2 x 8 Go DDR3 1600 MHz / SSD Samsung 850 EVO 250 Go / Corsair CS550M / OS X 10.10.5 / Clover
Mac Book 2007 1,83 GHz Intel Core 2 Duo, OS X 10.6.8
Go to the top of the page
 
+Quote Post
jeanjd63
posté 24 Apr 2020, 15:08
Message #65


Macbidouilleur d'Or !
*****

Groupe : Membres
Messages : 11 698
Inscrit : 15 Nov 2007
Lieu : Auvergne-Rhône-Alpe.
Membre no 99 922



Donc c'est bien sur le disk0 que le Firm est allé s'implanter et comme il n'est pas reconnu lors du boot, on tourne en rond.

Il faudrait retirer physiquement ce SSD, redémarrer sur le DDE puis repasser la commande bless et vérifier qu'elle est bien dans le répertoire EFI du DDE.

C'est possible?
Go to the top of the page
 
+Quote Post
BBarkes
posté 24 Apr 2020, 15:42
Message #66


Adepte de Macbidouille
*

Groupe : Membres
Messages : 68
Inscrit : 7 Feb 2017
Lieu : Planet Marseille
Membre no 201 138



C'est ce que je me disais.
Alors, pas immédiatement, j'ai jamais reçu les tournevis commandés sur Ebay en même temps que le SSD et l'adaptateur. J'ai du emprunter des embouts au réparateur de téléphone du quartier, je suis pas sûr qu'une troisième fois ...
Du coup, je règle ce contretemps et je te fais signe.
À bientôt


--------------------
IMack: GIGABYTE GA-H97M-D3H / INTEL - Core i5-4690 - 3,5 GHz / BALLISTIX - tecnical 16 Go 2 x 8 Go DDR3 1600 MHz / SSD Samsung 870 EVO 500 Go / Corsair CS550M / macOS 12.6.8 / Clover5156
MackBook Pro: HP ProBook G5 / i5-8250U / UHD 620/GTX 930MX, 1920x1080 / RAM 8 Go 2400 MHz DDR4 /SSD Samsung 860 EVO M.2 250 GB / Broadcom-bcm94352z / macOS 10.14.5 / Clover
IMack: GIGABYTE GA-H97M-D3H / INTEL - Core i5-4690 - 3,5 GHz / BALLISTIX - tecnical 16 Go 2 x 8 Go DDR3 1600 MHz / SSD Samsung 850 EVO 250 Go / Corsair CS550M / OS X 10.10.5 / Clover
Mac Book 2007 1,83 GHz Intel Core 2 Duo, OS X 10.6.8
Go to the top of the page
 
+Quote Post
jeanjd63
posté 24 Apr 2020, 16:01
Message #67


Macbidouilleur d'Or !
*****

Groupe : Membres
Messages : 11 698
Inscrit : 15 Nov 2007
Lieu : Auvergne-Rhône-Alpe.
Membre no 99 922



On va tenter un truc :

Tu vas faire :

Code
diskutil erasedisk free space mbr disk0


Puis tu repasses la commande bless
Go to the top of the page
 
+Quote Post
BBarkes
posté 24 Apr 2020, 18:46
Message #68


Adepte de Macbidouille
*

Groupe : Membres
Messages : 68
Inscrit : 7 Feb 2017
Lieu : Planet Marseille
Membre no 201 138



Apparemment ça le fait pas :
Code
Last login: Fri Apr 24 14:57:33 on ttys000
MacBook-Air:~ acu$ diskutil erasedisk free space mbr disk0
Started erase on disk0
Unmounting disk
Creating the partition map
Waiting for partitions to activate
Finished erase on disk0
MacBook-Air:~ acu$ sudo bless --mount / --firmware ~/Desktop/MBA61_0107_B00.scap --verbose --recovery
Password:
EFI found at IODeviceTree:/efi
Will need to copy 8523776 bytes to EFI system partition
GPT detected
No auxiliary booter partition required
System partition found
Returning booter information dictionary:
<CFBasicHash 0x7fd0d6500870 [0x7fff8f52daf0]>{type = mutable dict, count = 3,
entries =>
    0 : <CFString 0x10f8b8be0 [0x7fff8f52daf0]>{contents = "System Partitions"} = (
    disk1s1
)
    1 : <CFString 0x10f8b93c0 [0x7fff8f52daf0]>{contents = "Data Partitions"} = (
    disk1s2
)
    2 : <CFString 0x10f8b93e0 [0x7fff8f52daf0]>{contents = "Auxiliary Partitions"} = (
)
}

ESP disk1s1 is not accessible as a recovery device
Error while writing firmware updater for EFI
MacBook-Air:~ acu$


--------------------
IMack: GIGABYTE GA-H97M-D3H / INTEL - Core i5-4690 - 3,5 GHz / BALLISTIX - tecnical 16 Go 2 x 8 Go DDR3 1600 MHz / SSD Samsung 870 EVO 500 Go / Corsair CS550M / macOS 12.6.8 / Clover5156
MackBook Pro: HP ProBook G5 / i5-8250U / UHD 620/GTX 930MX, 1920x1080 / RAM 8 Go 2400 MHz DDR4 /SSD Samsung 860 EVO M.2 250 GB / Broadcom-bcm94352z / macOS 10.14.5 / Clover
IMack: GIGABYTE GA-H97M-D3H / INTEL - Core i5-4690 - 3,5 GHz / BALLISTIX - tecnical 16 Go 2 x 8 Go DDR3 1600 MHz / SSD Samsung 850 EVO 250 Go / Corsair CS550M / OS X 10.10.5 / Clover
Mac Book 2007 1,83 GHz Intel Core 2 Duo, OS X 10.6.8
Go to the top of the page
 
+Quote Post
jeanjd63
posté 24 Apr 2020, 18:53
Message #69


Macbidouilleur d'Or !
*****

Groupe : Membres
Messages : 11 698
Inscrit : 15 Nov 2007
Lieu : Auvergne-Rhône-Alpe.
Membre no 99 922



Tente sans le Recovery :

Code
sudo bless --mount / --firmware ~/Desktop/MBA61_0107_B00.scap --verbose
Go to the top of the page
 
+Quote Post
BBarkes
posté 24 Apr 2020, 19:34
Message #70


Adepte de Macbidouille
*

Groupe : Membres
Messages : 68
Inscrit : 7 Feb 2017
Lieu : Planet Marseille
Membre no 201 138



heu ?
Code
Last login: Fri Apr 24 19:44:52 on ttys000
MacBook-Air:~ acu$ sudo bless --mount / --firmware ~/Desktop/MBA61_0107_B00.scap --verbose
Password:
EFI found at IODeviceTree:/efi
Will need to copy 8523776 bytes to EFI system partition
GPT detected
No auxiliary booter partition required
System partition found
Returning booter information dictionary:
<CFBasicHash 0x7fdb0450f6c0 [0x7fff8f52daf0]>{type = mutable dict, count = 3,
entries =>
    0 : <CFString 0x10110ebe0 [0x7fff8f52daf0]>{contents = "System Partitions"} = (
    disk1s1
)
    1 : <CFString 0x10110f3c0 [0x7fff8f52daf0]>{contents = "Data Partitions"} = (
    disk1s2
)
    2 : <CFString 0x10110f3e0 [0x7fff8f52daf0]>{contents = "Auxiliary Partitions"} = (
)
}

Substituting ESP disk1s1
Mounting at /Volumes/bless.RpYP
Executing "/sbin/mount"
Returned 0
Creating /Volumes/bless.RpYP/EFI/APPLE/FIRMWARE if needed
Deleting previous contents of /Volumes/bless.RpYP/EFI/APPLE/FIRMWARE
Deleting /Volumes/bless.RpYP/EFI/APPLE/FIRMWARE/MBA61.scap (8520304 bytes)
Opened dest at /Volumes/bless.RpYP/EFI/APPLE/FIRMWARE/MBA61_0107_B00.scap for writing
preallocation not supported on this filesystem for /Volumes/bless.RpYP/EFI/APPLE/FIRMWARE/MBA61_0107_B00.scap

/Volumes/bless.RpYP/EFI/APPLE/FIRMWARE/MBA61_0107_B00.scap created successfully
Relative path of /Volumes/bless.RpYP/EFI/APPLE/FIRMWARE/MBA61_0107_B00.scap is \EFI\APPLE\FIRMWARE\MBA61_0107_B00.scap
IOMedia disk1s1 has UUID EDBD64B6-EF87-4B7A-B067-2C6AE0EF83B6
Executing "/sbin/umount"
Returned 0
Setting EFI NVRAM:
<CFBasicHash 0x7fdb0450f9f0 [0x7fff8f52daf0]>{type = mutable dict, count = 1,
entries =>
    1 : <CFString 0x10110ec00 [0x7fff8f52daf0]>{contents = "efi-boot-next"} = <CFString 0x7fdb04512aa0 [0x7fff8f52daf0]>{contents = "<array><dict><key>IOMatch</key><dict><key>IOProviderClass</key><string>IOMedia</string><key>IOPropertyMatch</key><dict><key>UUID</key><string>EDBD64B6-EF87-4B7A-B067-2C6AE0EF83B6</string></dict></dict><key>BLLastBSDName</key><string>disk1s1</string></dict><dict><key>IOEFIDevicePathType</key><string>MediaFilePath</string><key>Path</key><string>\EFI\APPLE\FIRMWARE\MBA61_0107_B00.scap</string></dict></array>"}
}

MacBook-Air:~ acu$


--------------------
IMack: GIGABYTE GA-H97M-D3H / INTEL - Core i5-4690 - 3,5 GHz / BALLISTIX - tecnical 16 Go 2 x 8 Go DDR3 1600 MHz / SSD Samsung 870 EVO 500 Go / Corsair CS550M / macOS 12.6.8 / Clover5156
MackBook Pro: HP ProBook G5 / i5-8250U / UHD 620/GTX 930MX, 1920x1080 / RAM 8 Go 2400 MHz DDR4 /SSD Samsung 860 EVO M.2 250 GB / Broadcom-bcm94352z / macOS 10.14.5 / Clover
IMack: GIGABYTE GA-H97M-D3H / INTEL - Core i5-4690 - 3,5 GHz / BALLISTIX - tecnical 16 Go 2 x 8 Go DDR3 1600 MHz / SSD Samsung 850 EVO 250 Go / Corsair CS550M / OS X 10.10.5 / Clover
Mac Book 2007 1,83 GHz Intel Core 2 Duo, OS X 10.6.8
Go to the top of the page
 
+Quote Post
jeanjd63
posté 24 Apr 2020, 19:37
Message #71


Macbidouilleur d'Or !
*****

Groupe : Membres
Messages : 11 698
Inscrit : 15 Nov 2007
Lieu : Auvergne-Rhône-Alpe.
Membre no 99 922



Que renvoie :

Code
diskutil mount disk1s1



puis

Code
ls -l /Volumes/EFI/EFI/APPLE/FIRMWARE

Go to the top of the page
 
+Quote Post
BBarkes
posté 24 Apr 2020, 19:43
Message #72


Adepte de Macbidouille
*

Groupe : Membres
Messages : 68
Inscrit : 7 Feb 2017
Lieu : Planet Marseille
Membre no 201 138



He:
Code
Last login: Fri Apr 24 20:40:26 on console
MacBook-Air:~ acu$ diskutil mount disk1s1
Volume on disk1s1 failed to mount
If the volume is damaged, try the "readOnly" option
MacBook-Air:~ acu$


--------------------
IMack: GIGABYTE GA-H97M-D3H / INTEL - Core i5-4690 - 3,5 GHz / BALLISTIX - tecnical 16 Go 2 x 8 Go DDR3 1600 MHz / SSD Samsung 870 EVO 500 Go / Corsair CS550M / macOS 12.6.8 / Clover5156
MackBook Pro: HP ProBook G5 / i5-8250U / UHD 620/GTX 930MX, 1920x1080 / RAM 8 Go 2400 MHz DDR4 /SSD Samsung 860 EVO M.2 250 GB / Broadcom-bcm94352z / macOS 10.14.5 / Clover
IMack: GIGABYTE GA-H97M-D3H / INTEL - Core i5-4690 - 3,5 GHz / BALLISTIX - tecnical 16 Go 2 x 8 Go DDR3 1600 MHz / SSD Samsung 850 EVO 250 Go / Corsair CS550M / OS X 10.10.5 / Clover
Mac Book 2007 1,83 GHz Intel Core 2 Duo, OS X 10.6.8
Go to the top of the page
 
+Quote Post
jeanjd63
posté 24 Apr 2020, 19:45
Message #73


Macbidouilleur d'Or !
*****

Groupe : Membres
Messages : 11 698
Inscrit : 15 Nov 2007
Lieu : Auvergne-Rhône-Alpe.
Membre no 99 922



Oups :

Code
sudo diskutil mount disk1s1


Puis la suite. smile.gif
Go to the top of the page
 
+Quote Post
BBarkes
posté 24 Apr 2020, 19:49
Message #74


Adepte de Macbidouille
*

Groupe : Membres
Messages : 68
Inscrit : 7 Feb 2017
Lieu : Planet Marseille
Membre no 201 138



smile.gif
Code
Last login: Fri Apr 24 20:43:47 on ttys001
MacBook-Air:~ acu$ sudo diskutil mount disk1s1
Password:
Volume EFI on disk1s1 mounted
MacBook-Air:~ acu$ ls -l /Volumes/EFI/EFI/APPLE/FIRMWARE
total 16642
-rwxrwxrwx  1 acu  staff  8520304 24 avr 20:34 MBA61_0107_B00.scap
MacBook-Air:~ acu$


--------------------
IMack: GIGABYTE GA-H97M-D3H / INTEL - Core i5-4690 - 3,5 GHz / BALLISTIX - tecnical 16 Go 2 x 8 Go DDR3 1600 MHz / SSD Samsung 870 EVO 500 Go / Corsair CS550M / macOS 12.6.8 / Clover5156
MackBook Pro: HP ProBook G5 / i5-8250U / UHD 620/GTX 930MX, 1920x1080 / RAM 8 Go 2400 MHz DDR4 /SSD Samsung 860 EVO M.2 250 GB / Broadcom-bcm94352z / macOS 10.14.5 / Clover
IMack: GIGABYTE GA-H97M-D3H / INTEL - Core i5-4690 - 3,5 GHz / BALLISTIX - tecnical 16 Go 2 x 8 Go DDR3 1600 MHz / SSD Samsung 850 EVO 250 Go / Corsair CS550M / OS X 10.10.5 / Clover
Mac Book 2007 1,83 GHz Intel Core 2 Duo, OS X 10.6.8
Go to the top of the page
 
+Quote Post
jeanjd63
posté 24 Apr 2020, 19:55
Message #75


Macbidouilleur d'Or !
*****

Groupe : Membres
Messages : 11 698
Inscrit : 15 Nov 2007
Lieu : Auvergne-Rhône-Alpe.
Membre no 99 922



Peux-tu redémarrer ?
Go to the top of the page
 
+Quote Post
BBarkes
posté 24 Apr 2020, 19:57
Message #76


Adepte de Macbidouille
*

Groupe : Membres
Messages : 68
Inscrit : 7 Feb 2017
Lieu : Planet Marseille
Membre no 201 138



Oui, le MBA a redémarré !


--------------------
IMack: GIGABYTE GA-H97M-D3H / INTEL - Core i5-4690 - 3,5 GHz / BALLISTIX - tecnical 16 Go 2 x 8 Go DDR3 1600 MHz / SSD Samsung 870 EVO 500 Go / Corsair CS550M / macOS 12.6.8 / Clover5156
MackBook Pro: HP ProBook G5 / i5-8250U / UHD 620/GTX 930MX, 1920x1080 / RAM 8 Go 2400 MHz DDR4 /SSD Samsung 860 EVO M.2 250 GB / Broadcom-bcm94352z / macOS 10.14.5 / Clover
IMack: GIGABYTE GA-H97M-D3H / INTEL - Core i5-4690 - 3,5 GHz / BALLISTIX - tecnical 16 Go 2 x 8 Go DDR3 1600 MHz / SSD Samsung 850 EVO 250 Go / Corsair CS550M / OS X 10.10.5 / Clover
Mac Book 2007 1,83 GHz Intel Core 2 Duo, OS X 10.6.8
Go to the top of the page
 
+Quote Post
jeanjd63
posté 24 Apr 2020, 20:03
Message #77


Macbidouilleur d'Or !
*****

Groupe : Membres
Messages : 11 698
Inscrit : 15 Nov 2007
Lieu : Auvergne-Rhône-Alpe.
Membre no 99 922



Que renvoie la commande :

Code
/usr/libexec/firmwarecheckers/eficheck/eficheck --integrity-check
Go to the top of the page
 
+Quote Post
BBarkes
posté 24 Apr 2020, 20:07
Message #78


Adepte de Macbidouille
*

Groupe : Membres
Messages : 68
Inscrit : 7 Feb 2017
Lieu : Planet Marseille
Membre no 201 138



Code
Last login: Fri Apr 24 21:07:23 on console
MacBook-Air:~ acu$ /usr/libexec/firmwarecheckers/eficheck/eficheck --integrity-check
EFI Version: MBA61.88Z.0099.B20.1509081314
Matching allowlist not found in EFIAllowListShipping. Searching in EFIAllowListAll.
Primary allowlist version match found. No changes detected in primary hashes.
MacBook-Air:~ acu$


--------------------
IMack: GIGABYTE GA-H97M-D3H / INTEL - Core i5-4690 - 3,5 GHz / BALLISTIX - tecnical 16 Go 2 x 8 Go DDR3 1600 MHz / SSD Samsung 870 EVO 500 Go / Corsair CS550M / macOS 12.6.8 / Clover5156
MackBook Pro: HP ProBook G5 / i5-8250U / UHD 620/GTX 930MX, 1920x1080 / RAM 8 Go 2400 MHz DDR4 /SSD Samsung 860 EVO M.2 250 GB / Broadcom-bcm94352z / macOS 10.14.5 / Clover
IMack: GIGABYTE GA-H97M-D3H / INTEL - Core i5-4690 - 3,5 GHz / BALLISTIX - tecnical 16 Go 2 x 8 Go DDR3 1600 MHz / SSD Samsung 850 EVO 250 Go / Corsair CS550M / OS X 10.10.5 / Clover
Mac Book 2007 1,83 GHz Intel Core 2 Duo, OS X 10.6.8
Go to the top of the page
 
+Quote Post
jeanjd63
posté 24 Apr 2020, 20:26
Message #79


Macbidouilleur d'Or !
*****

Groupe : Membres
Messages : 11 698
Inscrit : 15 Nov 2007
Lieu : Auvergne-Rhône-Alpe.
Membre no 99 922



Bon.

Le Firmware est bien copié sur la partition EFI du DDE, mais n'est pas exécuté.

Je n'ai plus trop d'idées pour mettre à jour ce Firm.

Le nouveau SSD a besoin de ce Firm pour démarrer et le Firm a besoin d'un SSD interne pour s'installer.

Tu peux regarder ceci, mais je doute que ça apporte qq chose : https://www.infosecurityeurope.com/__novado...649363065800000
Go to the top of the page
 
+Quote Post
BBarkes
posté 24 Apr 2020, 20:41
Message #80


Adepte de Macbidouille
*

Groupe : Membres
Messages : 68
Inscrit : 7 Feb 2017
Lieu : Planet Marseille
Membre no 201 138



Ha oui ! y a de la littérature ohmy.gif
le plus simple ne serait'il pas de remonter un SSD natif et d'updater à partir de là !? huh.gif


--------------------
IMack: GIGABYTE GA-H97M-D3H / INTEL - Core i5-4690 - 3,5 GHz / BALLISTIX - tecnical 16 Go 2 x 8 Go DDR3 1600 MHz / SSD Samsung 870 EVO 500 Go / Corsair CS550M / macOS 12.6.8 / Clover5156
MackBook Pro: HP ProBook G5 / i5-8250U / UHD 620/GTX 930MX, 1920x1080 / RAM 8 Go 2400 MHz DDR4 /SSD Samsung 860 EVO M.2 250 GB / Broadcom-bcm94352z / macOS 10.14.5 / Clover
IMack: GIGABYTE GA-H97M-D3H / INTEL - Core i5-4690 - 3,5 GHz / BALLISTIX - tecnical 16 Go 2 x 8 Go DDR3 1600 MHz / SSD Samsung 850 EVO 250 Go / Corsair CS550M / OS X 10.10.5 / Clover
Mac Book 2007 1,83 GHz Intel Core 2 Duo, OS X 10.6.8
Go to the top of the page
 
+Quote Post
jeanjd63
posté 24 Apr 2020, 21:00
Message #81


Macbidouilleur d'Or !
*****

Groupe : Membres
Messages : 11 698
Inscrit : 15 Nov 2007
Lieu : Auvergne-Rhône-Alpe.
Membre no 99 922



Si bien sûr. Faut-il encore avoir un SSD d'origine Apple????
Go to the top of the page
 
+Quote Post
baron
posté 24 Apr 2020, 22:59
Message #82


Macbidouilleur d'Or !
*****

Groupe : Modérateurs
Messages : 19 347
Inscrit : 22 Jul 2004
Lieu : Louvain-la-Neuve (Gaule Gelbique)
Membre no 21 291



J'imagine qu'un disque dur mécanique ferait aussi bien l'affaire, non ? unsure.gif

P.S. Tant que j'y suis, je lisais dernièrement cet article :
https://macbidouille.com/news/2017/10/03/fl...r-a-high-sierra
Peut-être y a-t-il une ou l'autre info à y glaner ?


--------------------
MacBook Pro 14’’ 2021, M1 Pro, 16 Go/1 To – macOS  12.6 “Monterey”  MacBook Pro 15’’ mi-2010 Core i5 2,53 GHz, 8 Go/SSD Samsung 860EVO 1 To – Mac OSX 10.6.8  Power Macintosh G3 beige de bureau, rev.1 @ 233MHz, 288 Mo/4Go – MacOS 9.1 — + carte PCI IDE/ATA Tempo 66 Acard 6260 avec HD interne Maxtor 80 Go + graveur interne CDRW/DVD LG GCC-4520B + tablette A4 Wacom UD-0608-A + LaCie ElectronBlueIV 19" + HP ScanJet 6100C   B-Box 3 + HP LaserJet 4000 N  
La recherche dans MacBidouille vous paraît obscure ? J'ai rédigé une proposition de FAQ. Le moteur logiciel a un peu changé depuis mais ça peut aider quand même.
Les corsaires mettent en berne…
Go to the top of the page
 
+Quote Post
jeanjd63
posté 25 Apr 2020, 05:12
Message #83


Macbidouilleur d'Or !
*****

Groupe : Membres
Messages : 11 698
Inscrit : 15 Nov 2007
Lieu : Auvergne-Rhône-Alpe.
Membre no 99 922



Citation (baron @ 24 Apr 2020, 23:59) *
J'imagine qu'un disque dur mécanique ferait aussi bien l'affaire, non ? unsure.gif

P.S. Tant que j'y suis, je lisais dernièrement cet article :
https://macbidouille.com/news/2017/10/03/fl...r-a-high-sierra
Peut-être y a-t-il une ou l'autre info à y glaner ?


Salut baron.

Oui un disque mécanique, sauf que sur le MBA il n'y a pas de connecteur SATA mais un connecteur SSD PCI.

Ensuite après les essais que nous avons faits, sur les dernières versions High Sierra et suivantes, FirmwareUpdates.pkg ne contient plus le dossier Scripts/postinstall_actions/update.
Et enfin même avec le Firm copié dans la partition EFI du DDE via la procédure bless, il n'est ensuite pas possible de forcer le système à démarrer dessus.
J'ai peut être raté qq chose???
Go to the top of the page
 
+Quote Post
baron
posté 25 Apr 2020, 10:35
Message #84


Macbidouilleur d'Or !
*****

Groupe : Modérateurs
Messages : 19 347
Inscrit : 22 Jul 2004
Lieu : Louvain-la-Neuve (Gaule Gelbique)
Membre no 21 291



Merci pour ces réponses circonstanciées. smile.gif

Pour ma part, je n'en connais pas plus sur la question. sad.gif


--------------------
MacBook Pro 14’’ 2021, M1 Pro, 16 Go/1 To – macOS  12.6 “Monterey”  MacBook Pro 15’’ mi-2010 Core i5 2,53 GHz, 8 Go/SSD Samsung 860EVO 1 To – Mac OSX 10.6.8  Power Macintosh G3 beige de bureau, rev.1 @ 233MHz, 288 Mo/4Go – MacOS 9.1 — + carte PCI IDE/ATA Tempo 66 Acard 6260 avec HD interne Maxtor 80 Go + graveur interne CDRW/DVD LG GCC-4520B + tablette A4 Wacom UD-0608-A + LaCie ElectronBlueIV 19" + HP ScanJet 6100C   B-Box 3 + HP LaserJet 4000 N  
La recherche dans MacBidouille vous paraît obscure ? J'ai rédigé une proposition de FAQ. Le moteur logiciel a un peu changé depuis mais ça peut aider quand même.
Les corsaires mettent en berne…
Go to the top of the page
 
+Quote Post

3 Pages V  < 1 2 3
Reply to this topicStart new topic
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :

 



Nous sommes le : 20th April 2024 - 03:37