IPB

Bienvenue invité ( Connexion | Inscription )

5 Pages V  < 1 2 3 4 5 >  
Reply to this topicStart new topic
> Renommer et/ou masquer les entrées de boot de Clover, Pour que ça soit plus joli !
Options
polyzargone
posté 10 Dec 2018, 07:59
Message #61


Macbidouilleur d'Or !
*****

Groupe : Modérateurs
Messages : 13 720
Inscrit : 11 May 2006
Membre no 60 938



Citation (MilkyWay @ 5 Dec 2018, 16:58) *
Salut,
En essayant de suivre le tuto du post #27, je bloque sur l'étape
Citation
Enfin, il faut ajouter les UUID APFS dans le champ Volume. Pour cela, il faut à nouveau lancer le terminal et taper :
Code
bdmesg
Puis lancer une recherche sur Preboot et sur Recovery de manière à déterminer leurs UUID.

Les seules itérations de Preboot (3) et Recovery (2) sont :
(…)


Poste ton bdmsg complet stp.


--------------------
Un MacmacOS 10.15.7 MacBook Air mi-2012 Core i5 1,7 GHz Intel HD 4000 SSD 64 Go
Des Hacks Asus Z170-P - Core i7 6700 3,40 GHz - Sapphire RX 6600 XT 8 Go - 32 Go DDR4 Gigabyte H110M-S2H - Core i5 6600 3,30 GHz - Zotac GTX 1060 6 Go - 32 Go DDR4 Gigabyte GA-H97-HD3 - Core i5 4570 3,20 GHz - MSI GTX 650 Ti 2 Go - 16 Go DDR3 Acer Aspire V3 772G Core i5 4210M 2,60 GHz - Intel HD 4600 + GTX 850M 2 Go (désactivée) - 16 Go DDR3 Dell Latitude e7470 Core i5 6300U 2,40 GHz - Intel HD 520 - 16 Go DDR4 Dell Latitude 7490 Core i7 8650U 1,90 GHz - Intel UHD 620 - 16 Go DDR4 Dell Latitude e7440 Core i7 4600U 2,10 GHz - Intel HD 4400 - 16 Go DDR3 HP Elite 8300 USFF - Core i7 3770S 3,90 GHz - Intel HD 4000 (+ quelques autres...)

Politique vis à vis des outils automatisés et des distributions - Guide d'installation - Tutoriels - Lexique et utilité des Kexts - FAQ Générale du Hackintosh - FAQ des Bootloaders - FAQ des Bootflags - FAQ des problèmes les plus courants - FAQ sur les Mises à jour Majeures sur Hackintosh
Go to the top of the page
 
+Quote Post
MilkyWay
posté 10 Dec 2018, 10:25
Message #62


Adepte de Macbidouille
*

Groupe : Membres
Messages : 85
Inscrit : 26 Sep 2004
Membre no 24 223



Voici :

CODE
0:100 0:100 MemLog inited, TSC freq: 40085444200:100 0:000 CPU was calibrated with RTC
0:100 0:000
0:100 0:000 Now is 10.12.2018, 8:32:55 (GMT)
0:100 0:000 Starting Clover revision: 4726 on American Megatrends EFI
0:100 0:000 Build with: [Args: --x64-mcp --no-usb --ext-co -D NO_GRUB_DRIVERS_EMBEDDED | -D DISABLE_USB_SUPPORT -D NO_GRUB_DRIVERS_EMBEDDED -D USE_BIOS_BLOCKIO -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE8 -n 3 | OS: 10.13.4 | XCODE: 9.3.1]
0:100 0:000 SelfDevicePath=PciRoot(0x0)\Pci(0x1B,0x4)\Pci(0x0,0x0)\NVMe(0x1,10-33-B3-81-58-38-25-00)\HD(1,GPT,C3E933D1-999A-4A08-8821-0B7536BB236E,0x28,0x64000) @395B2F98
0:100 0:000 SelfDirPath = \EFI\CLOVER
0:100 0:000 === [ Get Smbios ] ========================================
0:100 0:000 Type 16 Index = 0
0:100 0:000 Total Memory Slots Count = 4
0:100 0:000 Type 17 Index = 0
0:100 0:000 SmbiosTable.Type17->Speed = 2666MHz
0:100 0:000 SmbiosTable.Type17->Size = 16384MB
0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0
0:100 0:000 SmbiosTable.Type17->Vendor = 859B
0:100 0:000 SmbiosTable.Type17->SerialNumber = A423D2BE
0:100 0:000 SmbiosTable.Type17->PartNumber = BLS16G4D26BFSB.16FBD
0:100 0:000 Type 17 Index = 1
0:100 0:000 Ignoring insane frequency value 0MHz
0:100 0:000 SmbiosTable.Type17->Speed = 0MHz
0:100 0:000 SmbiosTable.Type17->Size = 0MB
0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 1 ChannelA-DIMM1
0:100 0:000 SmbiosTable.Type17->Vendor = <null string>
0:100 0:000 SmbiosTable.Type17->SerialNumber = <null string>
0:100 0:000 SmbiosTable.Type17->PartNumber = <null string>
0:100 0:000 Type 17 Index = 2
0:100 0:000 SmbiosTable.Type17->Speed = 2666MHz
0:100 0:000 SmbiosTable.Type17->Size = 16384MB
0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM0
0:100 0:000 SmbiosTable.Type17->Vendor = 859B
0:100 0:000 SmbiosTable.Type17->SerialNumber = A423D2BD
0:100 0:000 SmbiosTable.Type17->PartNumber = BLS16G4D26BFSB.16FBD
0:100 0:000 Type 17 Index = 3
0:100 0:000 Ignoring insane frequency value 0MHz
0:100 0:000 SmbiosTable.Type17->Speed = 0MHz
0:100 0:000 SmbiosTable.Type17->Size = 0MB
0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 3 ChannelB-DIMM1
0:100 0:000 SmbiosTable.Type17->Vendor = <null string>
0:100 0:000 SmbiosTable.Type17->SerialNumber = <null string>
0:100 0:000 SmbiosTable.Type17->PartNumber = <null string>
0:100 0:000 Boot status=0
0:100 0:000 Running on: 'Z370 AORUS Gaming 3' with board 'Z370 AORUS Gaming 3'
0:100 0:000 === [ GetCPUProperties ] ==================================
0:100 0:000 CPU Vendor = 756E6547 Model=906EA
0:100 0:000 The CPU supported SSE4.1
0:100 0:000 BrandString = Intel® Core™ i7-8086K CPU @ 4.00GHz
0:100 0:000 The CPU supported turbo
0:100 0:000 MSR 0x35 6000C
0:100 0:000 TSC/CCC Information Leaf:
0:100 0:000 numerator : 334
0:100 0:000 denominator : 2
0:100 0:000 Calibrated ARTFrequency: 24003260
0:100 0:000 MSR 0xE2 before patch 1E008000
0:100 0:000 MSR 0xE2 is locked, PM patches will be turned on
0:100 0:000 MSR 0xCE 08080838_F1012800
0:100 0:000 corrected FLEX_RATIO = E0000
0:100 0:000 FSBFrequency = 108 MHz, DMI FSBFrequency = 100 MHz, Corrected FSBFrequency = 100 MHz
0:100 0:000 MaxDiv/MinDiv: 40.0/8
0:100 0:000 Turbo: 44/45/46/50
0:100 0:000 Features: 0xBFEBFBFF
0:100 0:000 Threads: 12
0:100 0:000 Cores: 6
0:100 0:000 FSB: 100 MHz
0:100 0:000 CPU: 4300 MHz
0:100 0:000 TSC: 4300 MHz
0:100 0:000 PIS: 100 MHz
0:100 0:000 ExternalClock: 25 MHz
0:100 0:000 === [ GetDevices ] ========================================
0:100 0:000 PCI (00|00:00.00) : 8086 3EC2 class=060000
0:100 0:000 PCI (00|00:01.00) : 8086 1901 class=060400
0:100 0:000 PCI (00|01:00.00) : 1002 67DF class=030000
0:100 0:000 - GFX: Model=AMD Radeon RX 480 (ATI/AMD)
0:100 0:000 PCI (00|01:00.01) : 1002 AAF0 class=040300
0:100 0:000 - HDMI Audio:
0:100 0:000 PCI (00|00:08.00) : 8086 1911 class=088000
0:100 0:000 PCI (00|00:14.00) : 8086 A2AF class=0C0330
0:100 0:000 PCI (00|00:16.00) : 8086 A2BA class=078000
0:100 0:000 PCI (00|00:17.00) : 8086 A282 class=010601
0:100 0:000 PCI (00|00:1B.00) : 8086 A2E7 class=060400
0:100 0:000 PCI (00|00:1B.02) : 8086 A2E9 class=060400
0:100 0:000 PCI (00|03:00.00) : 1B21 2142 class=0C0330
0:100 0:000 PCI (00|00:1B.04) : 8086 A2EB class=060400
0:100 0:000 PCI (00|04:00.00) : 144D A808 class=010802
0:100 0:000 PCI (00|00:1C.00) : 8086 A290 class=060400
0:100 0:000 PCI (00|00:1C.02) : 8086 A292 class=060400
0:100 0:000 PCI (00|06:00.00) : 1969 E0B1 class=020000
0:100 0:000 - LAN: 0 Vendor=Atheros
0:100 0:000 PCI (00|00:1C.03) : 8086 A293 class=060400
0:100 0:000 PCI (00|07:00.00) : 14E4 43A0 class=028000
0:100 0:000 - WIFI: Vendor=Broadcom
0:100 0:000 PCI (00|00:1C.04) : 8086 A294 class=060400
0:100 0:000 PCI (00|00:1D.00) : 8086 A298 class=060400
0:100 0:000 PCI (00|00:1F.00) : 8086 A2C9 class=060100
0:100 0:000 PCI (00|00:1F.02) : 8086 A2A1 class=058000
0:100 0:000 PCI (00|00:1F.03) : 8086 A2F0 class=040300
0:100 0:000 PCI (00|00:1F.04) : 8086 A2A3 class=0C0500
0:100 0:000 === [ GetDefaultSettings ] ================================
0:100 0:000 Clover load options size = 40 bytes
0:100 0:000 Clover started with option to boot bootmgfw.efi from EFI
0:102 0:001 EFI\CLOVER\config.plist loaded: Success
0:102 0:000 === [ GetListOfThemes ] ===================================
0:102 0:000 - [00]: random
0:103 0:000 - [00]: embedded
0:103 0:000 === [ Found config plists ] ===============================
0:103 0:000 - config.plist
0:103 0:000 === [ GetEarlyUserSettings ] ==============================
0:103 0:000 timeout set to 5
0:103 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:103 0:000 KextsToPatch: 2 requested
0:103 0:000 - [00]: com.apple.driver.usb.AppleUSBXHCI (Port limit increase) :: MatchOS: 10.14.x :: BinPatch :: data len: 9
0:103 0:000 - [01]: AppleAHCIPort (External Icons Patch) :: BinPatch :: data len: 8
0:103 0:000 === [ LoadDrivers ] =======================================
0:104 0:000 Loading HFSPlus.efi status=Success
0:105 0:000 - driver needs connecting
0:105 0:000 Loading ApfsDriverLoader-64.efi status=Success
0:106 0:001 - driver needs connecting
0:106 0:000 Loading AptioMemoryFix-64.efi status=Success
0:107 0:000 2 drivers needs connecting ...
0:107 0:000 PlatformDriverOverrideProtocol->GetDriver overriden
0:107 0:000 HFS+ driver loaded
0:107 0:000 APFS driver loaded
0:107 0:000 Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
1:982 1:875 === [ InitScreen ] ========================================
1:982 0:000 SetMaxResolution: found best mode 5: 1920x1200
2:091 0:108 Video mode change to mode #5: Success
2:091 0:000 - set
2:091 0:000 Console modes reported: 5, available modes:
2:091 0:000 - [01]: 80x25 (current mode)
2:091 0:000 - [02]: 80x50
2:091 0:000 - [03]: 100x31
2:091 0:000 - [04]: 127x33
2:091 0:000 - [05]: 100x60
2:091 0:000 reinit: self device path=PciRoot(0x0)\Pci(0x1B,0x4)\Pci(0x0,0x0)\NVMe(0x1,10-33-B3-81-58-38-25-00)\HD(1,GPT,C3E933D1-999A-4A08-8821-0B7536BB236E,0x28,0x64000)
2:091 0:000 Using embedded font: Success
2:092 0:000 === [ GetMacAddress ] =====================================
2:092 0:000 MAC address of LAN #0= E0:D5:5E:A6:16:48:
2:092 0:000 === [ ScanSPD ] ===========================================
2:092 0:000 SMBus device : 8086 A2A3 class=0C0500 status=Success
2:092 0:000 SMBus CmdReg: 0x3
2:092 0:000 Scanning SMBus [8086:A2A3], mmio: 0xEE12A004, ioport: 0xF000, hostc: 0x11
2:092 0:000 Slots to scan [8]...
2:093 0:000 SPD[0]: Type 12 @0x50
2:111 0:018 XMP Profile1: 6*125 0 ns
2:111 0:000 Found module with XMP version 2.0
2:111 0:000 Using XMP Profile1 instead of standard frequency 2666MHz
2:111 0:000 DDR speed 2666MHz
2:111 0:000 Slot: 0 Type 26 16384MB 2666MHz Vendor=Crucial Technology PartNo=BLS16G4D26BFSB.16FBD SerialNo=0A0402030D020B0E
2:112 0:000 SPD[2]: Type 12 @0x52
2:130 0:018 XMP Profile1: 6*125 0 ns
2:130 0:000 Found module with XMP version 2.0
2:130 0:000 Using XMP Profile1 instead of standard frequency 2666MHz
2:130 0:000 DDR speed 2666MHz
2:130 0:000 Slot: 2 Type 26 16384MB 2666MHz Vendor=Crucial Technology PartNo=BLS16G4D26BFSB.16FBD SerialNo=0A0402030D020B0D
2:131 0:000 === [ GetAcpiTablesList ] =================================
2:131 0:000 Get Acpi Tables List from RSDT:
2:131 0:000 - [00]: FACP A M I len=132
2:131 0:000 - [01]: APIC A M I len=244
2:131 0:000 - [02]: FPDT A M I len=68
2:131 0:000 - [03]: FIDT A M I len=156
2:131 0:000 - [04]: MCFG A M I len=60
2:131 0:000 - [05]: SSDT A M I len=523
2:131 0:000 - [06]: SSDT A M I len=33198
2:131 0:000 - [07]: SSDT A M I len=12645
2:131 0:000 - [08]: SSDT A M I len=10051
2:131 0:000 - [09]: HPET A M I len=56
2:131 0:000 - [10]: SSDT A M I len=4522
2:131 0:000 - [11]: SSDT A M I len=10967
2:131 0:000 - [12]: UEFI A M I len=72
2:131 0:000 - [13]: SSDT A M I len=6062
2:131 0:000 - [14]: LPIT A M I len=148
2:131 0:000 - [15]: SSDT A M I len=321
2:131 0:000 - [16]: SSDT A M I len=671
2:131 0:000 - [17]: SSDT A M I len=12290
2:131 0:000 - [18]: SSDT A M I len=1303
2:131 0:000 - [19]: SSDT A M I len=745
2:131 0:000 - [20]: DBGP A M I len=52
2:131 0:000 - [21]: DBG2 A M I len=84
2:131 0:000 - [22]: DMAR A M I len=112
2:131 0:000 - [23]: BGRT A M I len=56
2:131 0:000 - [24]: WSMT A M I len=40
2:131 0:000 Calibrated TSC Frequency = 4008544420 = 4008MHz
2:131 0:000 === [ GetUserSettings ] ===================================
2:131 0:000 Add 1 devices:
2:131 0:000 USB FixOwnership: yes
2:131 0:000 Dropping 2 tables:
2:131 0:000 - [00]: Drop table signature="DMAR" (52414D44)
2:131 0:000 - set table: 52414D44, 0 to drop: yes
2:131 0:000 - [01]: Drop table signature="MATS" (5354414D)
2:131 0:000 - set table: 5354414D, 0 to drop: no
2:131 0:000 - final DSDT Fix mask=00060054
2:131 0:000 PatchesDSDT: 4 requested
2:131 0:000 - [00]: (change XHCI to XHC) lenToFind: 4, lenToReplace: 4, Target Bridge: <null string>
2:131 0:000 - [01]: (change XHC1 to XHC) lenToFind: 4, lenToReplace: 4, Target Bridge: <null string>
2:131 0:000 - [02]: (change SAT0 to SATA) lenToFind: 4, lenToReplace: 4, Target Bridge: <null string>
2:131 0:000 - [03]: (change HDAS to HDEF) lenToFind: 4, lenToReplace: 4, Target Bridge: <null string>
2:131 0:000 Using ProductName from config: iMac18,3
2:131 0:000 Found same BiosVersion in clover and config
2:131 0:000 BiosVersion: IM183.88Z.F000.B00.1809280842
2:131 0:000 BiosReleaseDate: 09/28/2018
2:131 0:000 Using EfiVersion from config: 166.0.0.0.0
2:131 0:000 Using FirmwareFeatures from config: 0xFC0FE137
2:131 0:000 Using FirmwareFeaturesMask from config: 0xFF1FFF3F
2:131 0:000 Board-ID set from config as Mac-BE088AF8C5EB4FA2
2:131 0:000 BoardType: 0xA
2:131 0:000 ChassisType: 0x9
2:132 0:000 === [ Found DSDT tables ] =================================
2:550 0:418 === [ ScanVolumes ] =======================================
2:550 0:000 Found 10 volumes with blockIO
2:550 0:000 - [00]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0)
2:550 0:000 - [01]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,10212ED5-C611-450A-BDF2-A996DAD02125,0x800,0x8000)
2:551 0:000 - [02]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,4562E748-CD62-4F4B-B5B9-E1F5A037F0EC,0x8800,0xEE73800)
2:551 0:000 Result of bootcode detection: bootable Windows (vista,win)
2:551 0:000 - [03]: Volume: PciRoot(0x0)\Pci(0x1B,0x4)\Pci(0x0,0x0)\NVMe(0x1,10-33-B3-81-58-38-25-00)
2:552 0:000 - [04]: Volume: PciRoot(0x0)\Pci(0x1B,0x4)\Pci(0x0,0x0)\NVMe(0x1,10-33-B3-81-58-38-25-00)\HD(1,GPT,C3E933D1-999A-4A08-8821-0B7536BB236E,0x28,0x64000)
2:552 0:000 Result of bootcode detection: bootable unknown (legacy)
2:552 0:000 This is SelfVolume !!
2:552 0:000 - [05]: Volume: PciRoot(0x0)\Pci(0x1B,0x4)\Pci(0x0,0x0)\NVMe(0x1,10-33-B3-81-58-38-25-00)\HD(2,GPT,43324AD0-9C45-4A2B-9145-C38419FB7474,0x64028,0x1D161920)
2:552 0:000 Result of bootcode detection: bootable unknown (legacy)
2:552 0:000 - [06]: Volume: PciRoot(0x0)\Pci(0x1B,0x4)\Pci(0x0,0x0)\NVMe(0x1,10-33-B3-81-58-38-25-00)\HD(2,GPT,43324AD0-9C45-4A2B-9145-C38419FB7474,0x64028,0x1D161920)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,B2C1DAF7533E6D4E825C4B65DFB669F6)
2:552 0:000 - [07]: Volume: PciRoot(0x0)\Pci(0x1B,0x4)\Pci(0x0,0x0)\NVMe(0x1,10-33-B3-81-58-38-25-00)\HD(2,GPT,43324AD0-9C45-4A2B-9145-C38419FB7474,0x64028,0x1D161920)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,CECF2342D4AF6932BBA43932B9639CEC)
2:552 0:000 - [08]: Volume: PciRoot(0x0)\Pci(0x1B,0x4)\Pci(0x0,0x0)\NVMe(0x1,10-33-B3-81-58-38-25-00)\HD(2,GPT,43324AD0-9C45-4A2B-9145-C38419FB7474,0x64028,0x1D161920)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,F92BCF2A54FA51478F7504D58602298D)
2:552 0:000 - [09]: Volume: PciRoot(0x0)\Pci(0x1B,0x4)\Pci(0x0,0x0)\NVMe(0x1,10-33-B3-81-58-38-25-00)\HD(2,GPT,43324AD0-9C45-4A2B-9145-C38419FB7474,0x64028,0x1D161920)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,AE336CE5871A7547B8FEE5C447857270)
2:552 0:000 === [ InitTheme ] =========================================
2:552 0:000 using embedded theme
2:553 0:000 Using embedded font: Success
2:553 0:000 Chosen embedded theme
2:553 0:000 after NVRAM boot-args=keepsyms=1 dart=0 debug=0x100 shikigva=40
2:553 0:000 === [ Dump SMC keys from NVRAM ] ==========================
2:553 0:000 no AppleSMC protocol
2:560 0:007 === [ AddCustomEntries ] ==================================
2:560 0:000 Custom entry 0 skipped because it is hidden.
2:560 0:000 === [ ScanLoader ] ========================================
2:560 0:000 - [04]: 'EFI'
2:563 0:003 AddLoaderEntry for Volume Name=EFI
2:563 0:000 Not match custom entry 0: Path: not match, VolumeType: match, Type: not match
2:567 0:003 AddLoaderEntry for Volume Name=EFI
2:567 0:000 skipped because entry is hidden
2:567 0:000 - [06]: 'Preboot'
2:575 0:007 AddLoaderEntry for Volume Name=Preboot
2:575 0:000 Skipped because matching custom entry 0!
2:578 0:002 AddLoaderEntry for Volume Name=Preboot
2:578 0:000 Not match custom entry 0: Path: not match, VolumeType: match, Type: not match
2:602 0:024 - [07]: 'OSX'
2:676 0:073 AddLoaderEntry for Volume Name=OSX
2:676 0:000 Not match custom entry 0: Path: not match, VolumeType: match, Type: match
2:693 0:017 Check if volume Is Hibernated:
2:693 0:000 Check sleep image 'by signature':
2:718 0:024 read prefs \Library\Preferences\com.apple.PowerManagement.plist status=Success
2:718 0:000 using default sleep image name = \private\var\vm\sleepimage
2:728 0:010 sleepimage not found -> Not Found
2:728 0:000 hibernated: no - sign
2:758 0:030 - [08]: 'Recovery'
2:765 0:006 AddLoaderEntry for Volume Name=Recovery
2:765 0:000 Not match custom entry 0: Path: not match, VolumeType: match, Type: not match
2:782 0:017 - [09]: 'VM'
2:783 0:000 Scanning legacy ...
2:783 0:000 2: 'Legacy HD2' (vista,win) add legacy
2:783 0:000 added 'Boot Windows from Legacy HD2' OSType=2 Icon=vista,win
2:783 0:000 === [ AddCustomTool ] =====================================
2:784 0:000 found tool \EFI\CLOVER\tools\Shell64U.efi
2:784 0:000 Checking EFI partition Volume 4 for Clover
2:784 0:000 Found Clover
2:785 0:000 === [ GetEfiBootDeviceFromNvram ] =========================
2:785 0:000 - efi-boot-device-data: PciRoot(0x0)\Pci(0x1B,0x4)\Pci(0x0,0x0)\NVMe(0x1,10-33-B3-81-58-38-25-00)\HD(2,GPT,43324AD0-9C45-4A2B-9145-C38419FB7474,0x64028,0x1D161920)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,CECF2342D4AF6932BBA43932B9639CEC)
2:785 0:000 - Volume: 'PciRoot(0x0)\Pci(0x1B,0x4)\Pci(0x0,0x0)\NVMe(0x1,10-33-B3-81-58-38-25-00)\HD(2,GPT,43324AD0-9C45-4A2B-9145-C38419FB7474,0x64028,0x1D161920)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,CECF2342D4AF6932BBA43932B9639CEC)'
2:785 0:000 - LoaderPath: '<null string>'
2:785 0:000 - Guid = 43324AD0-9C45-4A2B-9145-C38419FB7474
2:785 0:000 === [ FindStartupDiskVolume ] =============================
2:785 0:000 - Volume: partition = PciRoot(0x0)\Pci(0x1B,0x4)\Pci(0x0,0x0)\NVMe(0x1,10-33-B3-81-58-38-25-00)\HD(2,GPT,43324AD0-9C45-4A2B-9145-C38419FB7474,0x64028,0x1D161920)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,CECF2342D4AF6932BBA43932B9639CEC)
2:785 0:000 - searching for that partition
2:785 0:000 - found entry 2. 'Boot macOS from OSX', Volume 'OSX'
2:785 0:000 Boot redirected to Entry 2. 'Boot macOS from OSX'
2:785 0:000 DefaultIndex=2 and MainMenu.EntryCount=11
2:867 0:082 GUI ready
8:881 6:014 === [ StartLoader ] =======================================
8:881 0:000 Finally: ExternalClock=26MHz BusSpeed=100214kHz CPUFreq=4009MHz PIS: hw.busfrequency=104000000Hz
8:881 0:000 Loading boot.efi status=Success
8:958 0:076 GetOSVersion: 10.14 (18A391)
8:958 0:000 CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS | CSR_ALLOW_TASK_FOR_PID | CSR_ALLOW_UNRESTRICTED_DTRACE | CSR_ALLOW_UNRESTRICTED_NVRAM
8:958 0:000 Filtering KextPatches:
8:958 0:000 - [00]: com.apple.driver.usb.AppleUSBXHCI (Port limit increase) :: BinPatch :: [OS: 10.14 | MatchOS: 10.14.x | MatchBuild: All] ==> allowed
8:958 0:000 - [01]: AppleAHCIPort (External Icons Patch) :: BinPatch :: [OS: 10.14 | MatchOS: All | MatchBuild: All] ==> allowed
8:958 0:000 Will not patch boot.efi
8:958 0:000 === [ PatchSmbios ] =======================================
8:958 0:000 insert table 9 for dev 0:0
8:958 0:000 insert table 9 for dev 0:1
8:958 0:000 insert table 9 for dev 0:0
8:958 0:000 insert table 9 for dev 0:0
8:959 0:000 Trusting SMBIOS...
8:959 0:000 Channels: 2
8:959 0:000 Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23
8:959 0:000 partNum=BLS16G4D26BFSB.16FBD
8:959 0:000 SMBIOS Type 17 Index = 0 => 0 0:
8:959 0:000 BANK 0 DIMM0 2666MHz 16384MB
8:959 0:000 partNum=BLS16G4D26BFSB.16FBD
8:959 0:000 SMBIOS Type 17 Index = 1 => 2 2:
8:959 0:000 BANK 1 DIMM0 2666MHz 16384MB
8:959 0:000 SMBIOS Type 17 Index = 2 => 1 1:
8:959 0:000 BANK 0 DIMM1 EMPTY
8:959 0:000 SMBIOS Type 17 Index = 3 => 3 3:
8:959 0:000 BANK 1 DIMM1 EMPTY
8:959 0:000 mTotalSystemMemory = 32768
8:959 0:000 NumberOfMemoryDevices = 4
8:959 0:000 Type20[0]->End = 0xFFFFFF, Type17[0] = 0x4000
8:959 0:000 Type20[1]->End = 0x1FFFFFF, Type17[1] = 0xC000
8:959 0:000 Table 131 is present, CPUType=35
8:959 0:000 Change to: 705
8:959 0:000 === [ PatchACPI ] =========================================
8:959 0:000 Xsdt reallocation done
8:959 0:000 old FADT length=114
8:959 0:000 SignatureFixup: 0x905FF029 -> 0x0
8:960 0:001 Apply DsdtFixMask=0x00060054
8:960 0:000 drop _DSM mask=0xFFFF
8:960 0:000 === [ FixBiosDsdt ] =======================================
8:960 0:000 VideoCard devID=0x67DF1002
8:960 0:000 DisplayADR1[0] = 0x10000, DisplayADR2[0] = 0x0
8:960 0:000 USBADR[0] = 0x140000 and PCIe = 0xFFFE
8:960 0:000 USBADR[1] = 0x1B0002 and PCIe = 0x0
8:960 0:000 Found Airport BCM at 0x1C0003, 0x0
8:971 0:010 Audio HDA (addr:0x1F0003) setting specified layout-id=11 (0xB)
8:971 0:000 Patching DSDT:
8:971 0:000 - [change XHCI to XHC]: pattern 58484349, patched at: [ (CEA1) ]
8:971 0:000 - [change XHC1 to XHC]: pattern 58484331, bin not found / already patched!
8:971 0:000 - [change SAT0 to SATA]: pattern 53415430, patched at: [ (313) (D) (D) (16) (CF11) (30) (128EE) (3F) (1728) (4F0) (20) (20) (20) (20) (20) (20) (20) (20) (20) (131) (29) (2E) (2E) (2E) (2E) ]
8:971 0:000 - [change HDAS to HDEF]: pattern 48444153, patched at: [ (2DA) (12) (12) (B439) (181C) (84) (D) (2B) (32) (4F) (7B) (C3) (12BB6) (15FB) ]
8:971 0:000 0 replacements
8:971 0:000 first CPU found at A10F offset A112
8:971 0:000 score candidate at A10B
8:971 0:000 score inserted in acpi_cpu_score _PR_
8:971 0:000 Found ACPI CPU: PR00 | PR01 | PR02 | PR03 | PR04 | PR05 | PR06 | PR07 | PR08 | PR09 | PR10 | PR11 | PR12 | PR13 | PR14 | PR15 , within the score: _PR_
8:971 0:000 Start RTC Fix
8:972 0:000 found RTC Length not match, Maybe will cause CMOS reset will patch it.
8:972 0:000 found RTC had IRQNoFlag will move -3 bytes
8:972 0:000 ...len=29952
8:972 0:000 new size written to 28B4E shift=0 len=29952
8:972 0:000 len after correct outers 29952
8:972 0:000 Start TMR Fix
8:972 0:000 Start PIC Fix
8:972 0:000 PIC size=A5 at 28976
8:972 0:000 found CRS at 2898A size 8D
8:972 0:000 found PIC had IRQNoFlag will move -3 bytes
8:972 0:000 Fix Device PIC size -3
8:972 0:000 Start HPET Fix
8:973 0:000 Start SHUTDOWN Fix len=29921
8:973 0:000 PreCleanup XSDT: count=25, length=236
8:973 0:000 PreCleanup XSDT, corrected XSDT: count=25, length=236
8:973 0:000 === [ ACPIDropTables ] ====================================
8:973 0:000 Drop tables from XSDT, SIGN=DMAR TableID=A M I Length=112
8:973 0:000 Table[22]: DMAR A M I 112 dropped
8:973 0:000 0. [change XHCI to XHC]: pattern 58484349, bin not found / already patched!
8:973 0:000 1. [change XHC1 to XHC]: pattern 58484331, bin not found / already patched!
8:973 0:000 2. [change SAT0 to SATA]: pattern 53415430, patched at: [ (27) (E) (12) (12) (12) (12) (12) (AB) ]
8:973 0:000 3. [change HDAS to HDEF]: pattern 48444153, bin not found / already patched!
8:973 0:000 0 replacements
8:973 0:000 0. [change XHCI to XHC]: pattern 58484349, bin not found / already patched!
8:974 0:000 1. [change XHC1 to XHC]: pattern 58484331, bin not found / already patched!
8:974 0:000 2. [change SAT0 to SATA]: pattern 53415430, bin not found / already patched!
8:974 0:000 3. [change HDAS to HDEF]: pattern 48444153, bin not found / already patched!
8:974 0:000 0 replacements
8:974 0:000 Found OperationRegion(GGGT, SystemMemory, 3DF4A018, ...)
8:974 0:000 0. [change XHCI to XHC]: pattern 58484349, bin not found / already patched!
8:974 0:000 1. [change XHC1 to XHC]: pattern 58484331, bin not found / already patched!
8:974 0:000 2. [change SAT0 to SATA]: pattern 53415430, bin not found / already patched!
8:974 0:000 3. [change HDAS to HDEF]: pattern 48444153, bin not found / already patched!
8:974 0:000 0 replacements
8:974 0:000 Found OperationRegion(SANV, SystemMemory, 3DF4AC18, ...)
8:974 0:000 0. [change XHCI to XHC]: pattern 58484349, bin not found / already patched!
8:974 0:000 1. [change XHC1 to XHC]: pattern 58484331, bin not found / already patched!
8:974 0:000 2. [change SAT0 to SATA]: pattern 53415430, bin not found / already patched!
8:974 0:000 3. [change HDAS to HDEF]: pattern 48444153, bin not found / already patched!
8:974 0:000 0 replacements
8:974 0:000 0. [change XHCI to XHC]: pattern 58484349, bin not found / already patched!
8:974 0:000 1. [change XHC1 to XHC]: pattern 58484331, bin not found / already patched!
8:974 0:000 2. [change SAT0 to SATA]: pattern 53415430, bin not found / already patched!
8:974 0:000 3. [change HDAS to HDEF]: pattern 48444153, bin not found / already patched!
8:974 0:000 0 replacements
8:974 0:000 0. [change XHCI to XHC]: pattern 58484349, bin not found / already patched!
8:974 0:000 1. [change XHC1 to XHC]: pattern 58484331, bin not found / already patched!
8:974 0:000 2. [change SAT0 to SATA]: pattern 53415430, bin not found / already patched!
8:974 0:000 3. [change HDAS to HDEF]: pattern 48444153, bin not found / already patched!
8:974 0:000 0 replacements
8:974 0:000 0. [change XHCI to XHC]: pattern 58484349, bin not found / already patched!
8:974 0:000 1. [change XHC1 to XHC]: pattern 58484331, bin not found / already patched!
8:974 0:000 2. [change SAT0 to SATA]: pattern 53415430, bin not found / already patched!
8:974 0:000 3. [change HDAS to HDEF]: pattern 48444153, bin not found / already patched!
8:974 0:000 0 replacements
8:974 0:000 Found OperationRegion(PNVS, SystemMemory, 34F2E000, ...)
8:974 0:000 0. [change XHCI to XHC]: pattern 58484349, bin not found / already patched!
8:974 0:000 1. [change XHC1 to XHC]: pattern 58484331, bin not found / already patched!
8:974 0:000 2. [change SAT0 to SATA]: pattern 53415430, bin not found / already patched!
8:974 0:000 3. [change HDAS to HDEF]: pattern 48444153, patched at: [ (20) (48) ]
8:974 0:000 0 replacements
8:974 0:000 0. [change XHCI to XHC]: pattern 58484349, bin not found / already patched!
8:974 0:000 1. [change XHC1 to XHC]: pattern 58484331, bin not found / already patched!
8:974 0:000 2. [change SAT0 to SATA]: pattern 53415430, bin not found / already patched!
8:974 0:000 3. [change HDAS to HDEF]: pattern 48444153, bin not found / already patched!
8:974 0:000 0 replacements
8:974 0:000 0. [change XHCI to XHC]: pattern 58484349, bin not found / already patched!
8:974 0:000 1. [change XHC1 to XHC]: pattern 58484331, bin not found / already patched!
8:974 0:000 2. [change SAT0 to SATA]: pattern 53415430, bin not found / already patched!
8:974 0:000 3. [change HDAS to HDEF]: pattern 48444153, bin not found / already patched!
8:974 0:000 0 replacements
8:974 0:000 0. [change XHCI to XHC]: pattern 58484349, bin not found / already patched!
8:974 0:000 1. [change XHC1 to XHC]: pattern 58484331, bin not found / already patched!
8:974 0:000 2. [change SAT0 to SATA]: pattern 53415430, bin not found / already patched!
8:974 0:000 3. [change HDAS to HDEF]: pattern 48444153, bin not found / already patched!
8:974 0:000 0 replacements
8:974 0:000 0. [change XHCI to XHC]: pattern 58484349, bin not found / already patched!
8:974 0:000 1. [change XHC1 to XHC]: pattern 58484331, bin not found / already patched!
8:974 0:000 2. [change SAT0 to SATA]: pattern 53415430, bin not found / already patched!
8:974 0:000 3. [change HDAS to HDEF]: pattern 48444153, bin not found / already patched!
8:974 0:000 0 replacements
8:974 0:000 CPUBase=0 and ApicCPUBase=1 ApicCPUNum=1
8:974 0:000 Maximum control=0x28
8:974 0:000 Turbo control=0x32
8:974 0:000 P-States: min 0x8, max 0x32
8:974 0:000 SSDT with plugin-type without P-States is generated
8:974 0:000 Cleanup XSDT: count=26, length=244
8:974 0:000 corrected XSDT count=25, length=236
8:974 0:000 === [ RestSetup macOS ] ===================================
8:974 0:000 EdidDiscovered size=128
8:974 0:000 --- Discovered EDID Table size:128
8:974 0:000 000 | 00 FF FF FF FF FF FF 00 26 CD
8:974 0:000 010 | 0F 61 01 01 01 01 0A 17 01 04
8:974 0:000 020 | A5 34 20 78 3A 71 15 A3 54 4F
8:974 0:000 030 | A0 27 12 50 54 AD CF 00 31 46
8:974 0:000 040 | 81 80 81 8C 95 00 95 0F B3 00
8:974 0:000 050 | A9 40 D1 C0 28 3C 80 A0 70 B0
8:974 0:000 060 | 23 40 30 20 36 00 06 44 21 00
8:974 0:000 070 | 00 1A 00 00 00 FF 00 31 31 32
8:974 0:000 080 | 30 30 33 31 30 30 30 34 30 35
8:974 0:000 090 | 00 00 00 FD 00 32 4B 1E 4B 11
8:974 0:000 100 | 00 0A 20 20 20 20 20 20 00 00
8:974 0:000 110 | 00 FC 00 58 32 34 38 35 0A 20
8:974 0:000 120 | 20 20 20 20 20 20 01 BC
8:974 0:000 add device: PciRoot(0x0)/Pci(0x2,0x0)
8:974 0:000 Add key=framebuffer-stolenmem valuelen=4
8:974 0:000 Add key=framebuffer-patch-enable valuelen=4
8:974 0:000 Add key=AAPL,ig-platform-id valuelen=4
8:974 0:000 ATI injection not set
8:974 0:000 RCBA disabled; cannot use it
8:974 0:000 setting specified layout-id=11 (0xB)
8:974 0:000 stringlength = 1958
8:974 0:000 CurrentMode: Width=1920 Height=1200
8:974 0:000 Beginning FSInjection
8:974 0:000 - ERROR: gFSInjectProtocolGuid not found!
8:978 0:003 Use origin smbios table type 1 guid.
8:981 0:002 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
8:981 0:000 Extra kext: EFI\CLOVER\kexts\Other\NoVPAJpeg.kext (v.1.2.8)
8:985 0:004 Extra kext: EFI\CLOVER\kexts\Other\AtherosE2200Ethernet.kext (v.2.2.1)
8:990 0:004 Extra kext: EFI\CLOVER\kexts\Other\WhateverGreen.kext (v.1.2.3)
8:996 0:006 Extra kext: EFI\CLOVER\kexts\Other\VirtualSMC.kext (v.1.0.0)
9:003 0:006 Extra kext: EFI\CLOVER\kexts\Other\USBInjectAll.kext (v.0.6.9)
9:324 0:321 Extra kext: EFI\CLOVER\kexts\Other\Lilu.kext (v.1.2.7)
9:330 0:006 Extra kext: EFI\CLOVER\kexts\Other\AppleALC.kext (v.1.3.2)
9:712 0:382 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.14
9:713 0:000 SetStartupDiskVolume:
9:713 0:000 * Volume: 'OSX'
9:713 0:000 * LoaderPath: '<null string>'
9:713 0:000 * DevPath: OSX
9:713 0:000 * GUID = 43324AD0-9C45-4A2B-9145-C38419FB7474
9:713 0:000 * efi-boot-device: <array><dict><key>IOMatch</key><dict><key>IOProviderClass</key><string>IOMedia</string><key>IOPropertyMatch</key><dict><key>UUID</key><string>43324AD0-9C45-4A2B-9145-C38419FB7474</string></dict></dict></dict></array>
9:713 0:000 SetScreenResolution: 1920x1200 - already set
9:713 0:000 Custom boot is disabled


Ce message a été modifié par MilkyWay - 10 Dec 2018, 10:26.


--------------------
HACK : Mobo : Gigabayte Z370 Aorus Gaming 3 • CPU : Intel i7 8086k • RAM : 32 Go Ballistix Sport LT BLS16G4D26BFSB DDR4 2666 MHz • GPU : Sapphire RX580 Pulse • SSD système : Samsung 970 EVO NVMe M.2 - 250 Go • Wifi/BT : Carte BCM94360CS2 + adaptateur PCIe • Thunderbolt : Gigabyte GC Alpine Ridge
Go to the top of the page
 
+Quote Post
polyzargone
posté 11 Dec 2018, 19:47
Message #63


Macbidouilleur d'Or !
*****

Groupe : Modérateurs
Messages : 13 720
Inscrit : 11 May 2006
Membre no 60 938



Citation
2:567 0:000 - [06]: 'Preboot'
2:575 0:007 AddLoaderEntry for Volume Name=Preboot
2:575 0:000 Skipped because matching custom entry 0!
2:578 0:002 AddLoaderEntry for Volume Name=Preboot


Citation
[06]: Volume: PciRoot(0x0)\Pci(0x1B,0x4)\Pci(0x0,0x0)\NVMe(0x1,10-33-B3-81-58-38-25-00)\HD(2,GPT,43324AD0-9C45-4A2B-9145-C38419FB7474,0x64028,0x1D161920)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,B2C1DAF7533E6D4E825C4B65DFB669F6)


Volume = B2C1DAF7533E6D4E825C4B65DFB669F6

Citation
2:758 0:030 - [08]: 'Recovery'
2:765 0:006 AddLoaderEntry for Volume Name=Recovery
2:765 0:000 Not match custom entry 0: Path: not match, VolumeType: match, Type: not match


Citation
[08]: Volume: PciRoot(0x0)\Pci(0x1B,0x4)\Pci(0x0,0x0)\NVMe(0x1,10-33-B3-81-58-38-25-00)\HD(2,GPT,43324AD0-9C45-4A2B-9145-C38419FB7474,0x64028,0x1D161920)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,F92BCF2A54FA51478F7504D58602298D)


Volume = F92BCF2A54FA51478F7504D58602298D

Il te reste à utiliser la commande diskutil mount pour monter les volumes Preboot et Recovery sur le bureau et à copier/coller le nom des dossiers qu'ils contiennent pour avoir le Path (cf. post #27).


--------------------
Un MacmacOS 10.15.7 MacBook Air mi-2012 Core i5 1,7 GHz Intel HD 4000 SSD 64 Go
Des Hacks Asus Z170-P - Core i7 6700 3,40 GHz - Sapphire RX 6600 XT 8 Go - 32 Go DDR4 Gigabyte H110M-S2H - Core i5 6600 3,30 GHz - Zotac GTX 1060 6 Go - 32 Go DDR4 Gigabyte GA-H97-HD3 - Core i5 4570 3,20 GHz - MSI GTX 650 Ti 2 Go - 16 Go DDR3 Acer Aspire V3 772G Core i5 4210M 2,60 GHz - Intel HD 4600 + GTX 850M 2 Go (désactivée) - 16 Go DDR3 Dell Latitude e7470 Core i5 6300U 2,40 GHz - Intel HD 520 - 16 Go DDR4 Dell Latitude 7490 Core i7 8650U 1,90 GHz - Intel UHD 620 - 16 Go DDR4 Dell Latitude e7440 Core i7 4600U 2,10 GHz - Intel HD 4400 - 16 Go DDR3 HP Elite 8300 USFF - Core i7 3770S 3,90 GHz - Intel HD 4000 (+ quelques autres...)

Politique vis à vis des outils automatisés et des distributions - Guide d'installation - Tutoriels - Lexique et utilité des Kexts - FAQ Générale du Hackintosh - FAQ des Bootloaders - FAQ des Bootflags - FAQ des problèmes les plus courants - FAQ sur les Mises à jour Majeures sur Hackintosh
Go to the top of the page
 
+Quote Post
MilkyWay
posté 12 Dec 2018, 11:53
Message #64


Adepte de Macbidouille
*

Groupe : Membres
Messages : 85
Inscrit : 26 Sep 2004
Membre no 24 223



Ça à marché, merci !


--------------------
HACK : Mobo : Gigabayte Z370 Aorus Gaming 3 • CPU : Intel i7 8086k • RAM : 32 Go Ballistix Sport LT BLS16G4D26BFSB DDR4 2666 MHz • GPU : Sapphire RX580 Pulse • SSD système : Samsung 970 EVO NVMe M.2 - 250 Go • Wifi/BT : Carte BCM94360CS2 + adaptateur PCIe • Thunderbolt : Gigabyte GC Alpine Ridge
Go to the top of the page
 
+Quote Post
vinmard
posté 22 Apr 2019, 13:21
Message #65


Nouveau Membre


Groupe : Membres
Messages : 5
Inscrit : 24 May 2012
Membre no 176 709



Citation (yokin07 @ 26 Jun 2018, 15:25) *
salut, il suffit de rentrer le termes Preboot dans la case Hide Volume en haut à droite dans la fenêtre GUI.



Salut, ben oui la solution est simplement celle- là !
Pas là peine de faire des discussions interminables pour ça. (il suffit de rentrer le termes Preboot dans la case Hide Volume en haut à droite dans la fenêtre GUI.)
J'ai tourné sur les forums pendant une heure et j'ai failli rater LA SOLUTION à cause de la masse de discussions autour d'une seul petite question qui avait une réponse simple !

Ce message a été modifié par vinmard - 22 Apr 2019, 13:26.
Fichier(s) joint(s)
Fichier joint  Masquer_les_entr__es_de_boot_de_Clover.jpeg ( 158.27 Ko ) Nombre de téléchargements : 26
 
Go to the top of the page
 
+Quote Post
polyzargone
posté 22 Apr 2019, 13:30
Message #66


Macbidouilleur d'Or !
*****

Groupe : Modérateurs
Messages : 13 720
Inscrit : 11 May 2006
Membre no 60 938



Citation (vinmard @ 22 Apr 2019, 13:21) *
Salut, ben oui la solution simplement celle- là ! Pas là peine de faire des discussions interminable pour ça. (il suffit de rentrer le termes Preboot dans la case Hide Volume en haut à droite dans la fenêtre GUI.)
J'ai tourné sur les forums et j'ai failli rater ça à cause de la masse de discussions autour d'une seul petite question qui avait une réponse simple !


Puisque tu as l'air d'aimer les solutions de facilité (Tonymacx86), tu peux effectivement te contenter de ça.

Mais si tu veux avoir quelque chose de propre et au passage, apprendre deux trois trucs, tu peux aussi prendre le temps de lire et de suivre les tutos sans pour autant critiquer le travail derrière mad.gif !


--------------------
Un MacmacOS 10.15.7 MacBook Air mi-2012 Core i5 1,7 GHz Intel HD 4000 SSD 64 Go
Des Hacks Asus Z170-P - Core i7 6700 3,40 GHz - Sapphire RX 6600 XT 8 Go - 32 Go DDR4 Gigabyte H110M-S2H - Core i5 6600 3,30 GHz - Zotac GTX 1060 6 Go - 32 Go DDR4 Gigabyte GA-H97-HD3 - Core i5 4570 3,20 GHz - MSI GTX 650 Ti 2 Go - 16 Go DDR3 Acer Aspire V3 772G Core i5 4210M 2,60 GHz - Intel HD 4600 + GTX 850M 2 Go (désactivée) - 16 Go DDR3 Dell Latitude e7470 Core i5 6300U 2,40 GHz - Intel HD 520 - 16 Go DDR4 Dell Latitude 7490 Core i7 8650U 1,90 GHz - Intel UHD 620 - 16 Go DDR4 Dell Latitude e7440 Core i7 4600U 2,10 GHz - Intel HD 4400 - 16 Go DDR3 HP Elite 8300 USFF - Core i7 3770S 3,90 GHz - Intel HD 4000 (+ quelques autres...)

Politique vis à vis des outils automatisés et des distributions - Guide d'installation - Tutoriels - Lexique et utilité des Kexts - FAQ Générale du Hackintosh - FAQ des Bootloaders - FAQ des Bootflags - FAQ des problèmes les plus courants - FAQ sur les Mises à jour Majeures sur Hackintosh
Go to the top of the page
 
+Quote Post
vinmard
posté 22 Apr 2019, 13:42
Message #67


Nouveau Membre


Groupe : Membres
Messages : 5
Inscrit : 24 May 2012
Membre no 176 709



Citation (polyzargone @ 22 Apr 2019, 14:30) *
Citation (vinmard @ 22 Apr 2019, 13:21) *
Salut, ben oui la solution simplement celle- là ! Pas là peine de faire des discussions interminable pour ça. (il suffit de rentrer le termes Preboot dans la case Hide Volume en haut à droite dans la fenêtre GUI.)
J'ai tourné sur les forums et j'ai failli rater ça à cause de la masse de discussions autour d'une seul petite question qui avait une réponse simple !


Puisque tu as l'air d'aimer les solutions de facilité (Tonymacx86), tu peux effectivement te contenter de ça.

Mais si tu veux avoir quelque chose de propre et au passage, apprendre deux trois trucs, tu peux aussi prendre le temps de lire et de suivre les tutos sans pour autant critiquer le travail derrière mad.gif !


Désolé, mais je ne critique pas ce que tu fais, plutôt la masse des commentaires qui amenent + de confusion.
J'essai de m'en sortir avec Tonymacx86 mais je galère bien aussi avec eux, notamment par le fait de la langue.
Vivement un tuto complet du Clover en pdf à l'ancienne avec des entrées de chapitres et tuti quanti.
Vive le monde du libre et de la connaissance bien partagé !
Go to the top of the page
 
+Quote Post
deneb
posté 25 Apr 2019, 00:44
Message #68


Adepte de Macbidouille
*

Groupe : Membres
Messages : 62
Inscrit : 16 Jul 2007
Membre no 90 739



Bonjour, je reviens dans ce sujet longtemps en sommeil... Jusqu'à maintenant j'avais réussi à avoir mes entrées de boot correspondant aux différents volumes, et recovery. Mais j'ai eu l'imprudence de laisser traîner le fichier d'install de Mojave (je suis encore sous High Sierra) dans mon dossier Applications, (j'avais espéré passer sous Mojave, mais avec ma carte NVidia j'ai attendu le pilote 10.14 qui n'est jamais venu!). Et depuis j'ai en première entrée de boot une "install macosX on "nom_du_volume" qui persiste bien que j'ai supprimé le fichier d'install. Je ne comprends pas pourquoi... Il y a un moyen simple de la faire disparaître ?(ou de la faire passer en second, sinon on démarre dessus avec le boot automatique). Merci d'avance.


--------------------
Mac: Macbook Pro 13' 2015 SSD 256Mo Mem 8Mo
Plusieurs Hacks: Gigabyte Z77HN Wifi core i5, 16Mo, d'abord sous Chimera puis passé sous Clover pour El Capitan puis Sierra, Gigabyte H87N Wifi core i5, 16 Mo, et le plus récent Gigabyte Z97PD3 - Intel Core i5 4690K 16Go et carte graphique Gigabyte Aorus Radeon Rx 570 4Go dans un super boitier Cooler Master Silencio 550 (qui permet d'insérer à chaud dans une baie connectée en SATA un disque 3,5' )
Go to the top of the page
 
+Quote Post
Patrice Broussea...
posté 25 Apr 2019, 01:17
Message #69


Macbidouilleur de vermeil !
****

Groupe : Membres
Messages : 931
Inscrit : 18 Jan 2015
Lieu : Montréal, Québec
Membre no 193 846



Citation (deneb @ 24 Apr 2019, 18:44) *
Bonjour, je reviens dans ce sujet longtemps en sommeil... Jusqu'à maintenant j'avais réussi à avoir mes entrées de boot correspondant aux différents volumes, et recovery. Mais j'ai eu l'imprudence de laisser traîner le fichier d'install de Mojave (je suis encore sous High Sierra) dans mon dossier Applications, (j'avais espéré passer sous Mojave, mais avec ma carte NVidia j'ai attendu le pilote 10.14 qui n'est jamais venu!). Et depuis j'ai en première entrée de boot une "install macosX on "nom_du_volume" qui persiste bien que j'ai supprimé le fichier d'install. Je ne comprends pas pourquoi... Il y a un moyen simple de la faire disparaître ?(ou de la faire passer en second, sinon on démarre dessus avec le boot automatique). Merci d'avance.


Tu dois avoir un dossier "install macOS " quelque part sur ton disque dur, peut-être caché. Il s'agit seulement de le mettre à la corbeille. Je sais qu'il y a un shortcut pour afficher les dossiers et fichiers cachés... mais je ne me rappelle plus c'est quoi?

En fait l'installateur de Mojave a déjà copié les fichiers d'installation alors même si tu supprimes l'application Mojave, ce dossier offre une entrée EFI pour Clover.


--------------------
Nouveau Hackintosh dédié MAO • Gigabyte Designare i7 9700K 3,6GHz - RX560 - 32 Go DDR4 - OS X 10.14.6/Win 10 - OpenCore 0.8.8 Mod No ACPI
Hackintosh Bureau • Dell XPS 8930 i7 8700 3,2GHz - Radeon RX580 - 32 Go DDR4 - MacOS 13.6.4/MacOS 14.3.1 test Windows 11 - OpenCore 0.9.7 Mod No ACPI
Ancien Hackintosh dédié MAO • Dell Optiplex 9020 i7 4770 3,4GHz - GT710 - 16 Go DDR3 - OS X 10.14.6 - OpenCore 0.8.8
Go to the top of the page
 
+Quote Post
deneb
posté 29 Apr 2019, 15:27
Message #70


Adepte de Macbidouille
*

Groupe : Membres
Messages : 62
Inscrit : 16 Jul 2007
Membre no 90 739



Citation (Patrice Brousseau @ 25 Apr 2019, 02:17) *
Citation (deneb @ 24 Apr 2019, 18:44) *
Bonjour, je reviens dans ce sujet longtemps en sommeil... Jusqu'à maintenant j'avais réussi à avoir mes entrées de boot correspondant aux différents volumes, et recovery. Mais j'ai eu l'imprudence de laisser traîner le fichier d'install de Mojave (je suis encore sous High Sierra) dans mon dossier Applications, (j'avais espéré passer sous Mojave, mais avec ma carte NVidia j'ai attendu le pilote 10.14 qui n'est jamais venu!). Et depuis j'ai en première entrée de boot une "install macosX on "nom_du_volume" qui persiste bien que j'ai supprimé le fichier d'install. Je ne comprends pas pourquoi... Il y a un moyen simple de la faire disparaître ?(ou de la faire passer en second, sinon on démarre dessus avec le boot automatique). Merci d'avance.


Tu dois avoir un dossier "install macOS " quelque part sur ton disque dur, peut-être caché. Il s'agit seulement de le mettre à la corbeille. Je sais qu'il y a un shortcut pour afficher les dossiers et fichiers cachés... mais je ne me rappelle plus c'est quoi?

En fait l'installateur de Mojave a déjà copié les fichiers d'installation alors même si tu supprimes l'application Mojave, ce dossier offre une entrée EFI pour Clover.


Sorry j'ai zappé ta réponse... J'ai recherché "install macOS" avec spotlight (avec options fichiers système et fichiers visibles ou invisibles) sans succès... Je ne sais pas comment Clover repère qu'il y a une install sur le disque, mais cette solution ne marche pas...
PS au fait le raccourci pour voir les fichiers invisibles est Fn-command-point (soit Fn+command+MAJ+.)



--------------------
Mac: Macbook Pro 13' 2015 SSD 256Mo Mem 8Mo
Plusieurs Hacks: Gigabyte Z77HN Wifi core i5, 16Mo, d'abord sous Chimera puis passé sous Clover pour El Capitan puis Sierra, Gigabyte H87N Wifi core i5, 16 Mo, et le plus récent Gigabyte Z97PD3 - Intel Core i5 4690K 16Go et carte graphique Gigabyte Aorus Radeon Rx 570 4Go dans un super boitier Cooler Master Silencio 550 (qui permet d'insérer à chaud dans une baie connectée en SATA un disque 3,5' )
Go to the top of the page
 
+Quote Post
Patrice Broussea...
posté 29 Apr 2019, 21:37
Message #71


Macbidouilleur de vermeil !
****

Groupe : Membres
Messages : 931
Inscrit : 18 Jan 2015
Lieu : Montréal, Québec
Membre no 193 846



Ah ben là, je suis largué... Normalement, ce dossier serait à la racine du disque je crois (corrigez-moi quelqu'un si je me trompe...).

Peut-être essayer un reflash du BIOS?


--------------------
Nouveau Hackintosh dédié MAO • Gigabyte Designare i7 9700K 3,6GHz - RX560 - 32 Go DDR4 - OS X 10.14.6/Win 10 - OpenCore 0.8.8 Mod No ACPI
Hackintosh Bureau • Dell XPS 8930 i7 8700 3,2GHz - Radeon RX580 - 32 Go DDR4 - MacOS 13.6.4/MacOS 14.3.1 test Windows 11 - OpenCore 0.9.7 Mod No ACPI
Ancien Hackintosh dédié MAO • Dell Optiplex 9020 i7 4770 3,4GHz - GT710 - 16 Go DDR3 - OS X 10.14.6 - OpenCore 0.8.8
Go to the top of the page
 
+Quote Post
polyzargone
posté 30 Apr 2019, 06:06
Message #72


Macbidouilleur d'Or !
*****

Groupe : Modérateurs
Messages : 13 720
Inscrit : 11 May 2006
Membre no 60 938



Tape ça dans le terminal et copie/colle le résultat ici :

Code
cd / && ls -la


--------------------
Un MacmacOS 10.15.7 MacBook Air mi-2012 Core i5 1,7 GHz Intel HD 4000 SSD 64 Go
Des Hacks Asus Z170-P - Core i7 6700 3,40 GHz - Sapphire RX 6600 XT 8 Go - 32 Go DDR4 Gigabyte H110M-S2H - Core i5 6600 3,30 GHz - Zotac GTX 1060 6 Go - 32 Go DDR4 Gigabyte GA-H97-HD3 - Core i5 4570 3,20 GHz - MSI GTX 650 Ti 2 Go - 16 Go DDR3 Acer Aspire V3 772G Core i5 4210M 2,60 GHz - Intel HD 4600 + GTX 850M 2 Go (désactivée) - 16 Go DDR3 Dell Latitude e7470 Core i5 6300U 2,40 GHz - Intel HD 520 - 16 Go DDR4 Dell Latitude 7490 Core i7 8650U 1,90 GHz - Intel UHD 620 - 16 Go DDR4 Dell Latitude e7440 Core i7 4600U 2,10 GHz - Intel HD 4400 - 16 Go DDR3 HP Elite 8300 USFF - Core i7 3770S 3,90 GHz - Intel HD 4000 (+ quelques autres...)

Politique vis à vis des outils automatisés et des distributions - Guide d'installation - Tutoriels - Lexique et utilité des Kexts - FAQ Générale du Hackintosh - FAQ des Bootloaders - FAQ des Bootflags - FAQ des problèmes les plus courants - FAQ sur les Mises à jour Majeures sur Hackintosh
Go to the top of the page
 
+Quote Post
deneb
posté 30 Apr 2019, 12:04
Message #73


Adepte de Macbidouille
*

Groupe : Membres
Messages : 62
Inscrit : 16 Jul 2007
Membre no 90 739



Citation (polyzargone @ 30 Apr 2019, 07:06) *
Tape ça dans le terminal et copie/colle le résultat ici :

Code
cd / && ls -la


Tu es un lève tôt ! biggrin.gif J'ai déjà listé avec affichage des fichiers cachés, mais rien vu de notable... (à part un vieux dossier "Extra" du temps de Chameleon qui a survécu à plusieurs clonages et changements de système !) - donc je l'ai viré, mais j'ai toujours "install MacOS from..."

Code
Last login: Tue Apr 30 01:43:12 on ttys000
Albackintosh:~ dlb$ cd / && ls -la
total 191
drwxr-xr-x@  17 dlb   staff    578  5 jui  2016 $RECYCLE.BIN
drwxr-xr-x   33 root  wheel   1190 29 avr 16:39 .
drwxr-xr-x   33 root  wheel   1190 29 avr 16:39 ..
-rw-rw-r--@   1 root  wheel   6148 24 mai  2016 .DS_Store
d--x--x--x    9 root  wheel    306 29 avr 16:38 .DocumentRevisions-V100
drwx------@   8 dlb   staff    272 24 oct  2015 .IABootFiles
drwxr-xr-x@   2 root  wheel     68 24 avr 17:39 .PKInstallSandboxManager-SystemSoftware
drwx------    5 dlb   staff    170 29 aoû  2018 .Spotlight-V100
d-wx-wx-wt    3 root  wheel    102 22 avr 16:05 .TemporaryItems
srwxrwxrwx    1 root  wheel      0 29 avr 16:38 .dbfseventsd
----------    1 root  admin      0 16 fév  2018 .file
drwx------   90 dlb   staff   3060 30 avr 12:11 .fseventsd
-rw-------    1 root  wheel  65536  8 avr 03:01 .hotfiles.btree
drwxr-xr-x@   2 root  wheel     68 12 avr  2018 .vol
drwxrwxr-x+ 171 root  admin   5814 29 avr 16:28 Applications
drwxr-xr-x+  68 root  wheel   2312 24 aoû  2018 Library
drwxr-xr-x@   5 root  wheel    170 18 avr  2018 System
drwxr-xr-x@   4 dlb   staff    136 18 avr  2018 System Volume Information
drwxr-xr-x    8 root  admin    272 18 avr  2018 Users
drwxr-xr-x@  13 root  wheel    442 30 avr 12:05 Volumes
drwxr-xr-x@  38 root  wheel   1292 28 mar  2018 bin
dr-xr-xr-x    3 root  wheel   5328 29 avr 16:37 dev
lrwxr-xr-x@   1 root  wheel     11 12 avr  2018 etc -> private/etc
dr-xr-xr-x    2 root  wheel      1 30 avr 12:09 home
-rw-r--r--@   1 root  wheel    313  7 fév  2018 installer.failurerequests
dr-xr-xr-x    2 root  wheel      1 30 avr 12:09 net
drwxr-xr-x@   7 root  wheel    238 14 avr  2018 private
drwxr-xr-x@  63 root  wheel   2142 12 avr  2018 sbin
lrwxr-xr-x@   1 root  wheel     11 12 avr  2018 tmp -> private/tmp
drwxr-xr-x@  10 root  wheel    340 13 avr  2018 usr
lrwxr-xr-x@   1 root  wheel     11 12 avr  2018 var -> private/var
Albackintosh:/ dlb$


--------------------
Mac: Macbook Pro 13' 2015 SSD 256Mo Mem 8Mo
Plusieurs Hacks: Gigabyte Z77HN Wifi core i5, 16Mo, d'abord sous Chimera puis passé sous Clover pour El Capitan puis Sierra, Gigabyte H87N Wifi core i5, 16 Mo, et le plus récent Gigabyte Z97PD3 - Intel Core i5 4690K 16Go et carte graphique Gigabyte Aorus Radeon Rx 570 4Go dans un super boitier Cooler Master Silencio 550 (qui permet d'insérer à chaud dans une baie connectée en SATA un disque 3,5' )
Go to the top of the page
 
+Quote Post
Patrice Broussea...
posté 30 Apr 2019, 21:39
Message #74


Macbidouilleur de vermeil !
****

Groupe : Membres
Messages : 931
Inscrit : 18 Jan 2015
Lieu : Montréal, Québec
Membre no 193 846



Combien de mo/go fait le .PKInstallSandboxManager.... Ça pourrait pas être ça? Qu'en penses-tu Polyzargone.

@deneb: as-tu d'autres installations de MacOS sur ce disque ou sur un autre?

Édition: ne touche pas à .PKInstallSandboxManager..., vital pour le système à ce que j'ai lu!! En même temps, je n'ai pas ce fichier sur mon Hack???

Je ne sais plus quoi en penser finalement unsure.gif

Ce message a été modifié par Patrice Brousseau - 30 Apr 2019, 21:50.


--------------------
Nouveau Hackintosh dédié MAO • Gigabyte Designare i7 9700K 3,6GHz - RX560 - 32 Go DDR4 - OS X 10.14.6/Win 10 - OpenCore 0.8.8 Mod No ACPI
Hackintosh Bureau • Dell XPS 8930 i7 8700 3,2GHz - Radeon RX580 - 32 Go DDR4 - MacOS 13.6.4/MacOS 14.3.1 test Windows 11 - OpenCore 0.9.7 Mod No ACPI
Ancien Hackintosh dédié MAO • Dell Optiplex 9020 i7 4770 3,4GHz - GT710 - 16 Go DDR3 - OS X 10.14.6 - OpenCore 0.8.8
Go to the top of the page
 
+Quote Post
polyzargone
posté 1 May 2019, 01:39
Message #75


Macbidouilleur d'Or !
*****

Groupe : Modérateurs
Messages : 13 720
Inscrit : 11 May 2006
Membre no 60 938



Citation (deneb @ 30 Apr 2019, 12:04) *
Tu es un lève tôt !


Et un couche tard laugh.gif !

Citation (Patrice Brousseau @ 30 Apr 2019, 21:39) *
Combien de mo/go fait le .PKInstallSandboxManager.... Ça pourrait pas être ça? Qu'en penses-tu Polyzargone.

Édition: ne touche pas à .PKInstallSandboxManager..., vital pour le système à ce que j'ai lu!! En même temps, je n'ai pas ce fichier sur mon Hack???


Moi non plus je n'ai pas le .PKInstallSandboxManager mais dans le doute, on va le laisser.

Je pense plutôt que c'est le .IABootFiles qu'il faudrait supprimer.

Code
drwx------@   8 dlb   staff    272 24 oct  2015 .IABootFiles


--------------------
Un MacmacOS 10.15.7 MacBook Air mi-2012 Core i5 1,7 GHz Intel HD 4000 SSD 64 Go
Des Hacks Asus Z170-P - Core i7 6700 3,40 GHz - Sapphire RX 6600 XT 8 Go - 32 Go DDR4 Gigabyte H110M-S2H - Core i5 6600 3,30 GHz - Zotac GTX 1060 6 Go - 32 Go DDR4 Gigabyte GA-H97-HD3 - Core i5 4570 3,20 GHz - MSI GTX 650 Ti 2 Go - 16 Go DDR3 Acer Aspire V3 772G Core i5 4210M 2,60 GHz - Intel HD 4600 + GTX 850M 2 Go (désactivée) - 16 Go DDR3 Dell Latitude e7470 Core i5 6300U 2,40 GHz - Intel HD 520 - 16 Go DDR4 Dell Latitude 7490 Core i7 8650U 1,90 GHz - Intel UHD 620 - 16 Go DDR4 Dell Latitude e7440 Core i7 4600U 2,10 GHz - Intel HD 4400 - 16 Go DDR3 HP Elite 8300 USFF - Core i7 3770S 3,90 GHz - Intel HD 4000 (+ quelques autres...)

Politique vis à vis des outils automatisés et des distributions - Guide d'installation - Tutoriels - Lexique et utilité des Kexts - FAQ Générale du Hackintosh - FAQ des Bootloaders - FAQ des Bootflags - FAQ des problèmes les plus courants - FAQ sur les Mises à jour Majeures sur Hackintosh
Go to the top of the page
 
+Quote Post
Patrice Broussea...
posté 1 May 2019, 02:08
Message #76


Macbidouilleur de vermeil !
****

Groupe : Membres
Messages : 931
Inscrit : 18 Jan 2015
Lieu : Montréal, Québec
Membre no 193 846



Citation (polyzargone @ 30 Apr 2019, 19:39) *
Citation (deneb @ 30 Apr 2019, 12:04) *
Tu es un lève tôt !


Et un couche tard laugh.gif !

Citation (Patrice Brousseau @ 30 Apr 2019, 21:39) *
Combien de mo/go fait le .PKInstallSandboxManager.... Ça pourrait pas être ça? Qu'en penses-tu Polyzargone.

Édition: ne touche pas à .PKInstallSandboxManager..., vital pour le système à ce que j'ai lu!! En même temps, je n'ai pas ce fichier sur mon Hack???


Moi non plus je n'ai pas le .PKInstallSandboxManager mais dans le doute, on va le laisser.

Je pense plutôt que c'est le .IABootFiles qu'il faudrait supprimer.

Code
drwx------@   8 dlb   staff    272 24 oct  2015 .IABootFiles



Ça fait un bail que ce machin traîne là... 2015!


--------------------
Nouveau Hackintosh dédié MAO • Gigabyte Designare i7 9700K 3,6GHz - RX560 - 32 Go DDR4 - OS X 10.14.6/Win 10 - OpenCore 0.8.8 Mod No ACPI
Hackintosh Bureau • Dell XPS 8930 i7 8700 3,2GHz - Radeon RX580 - 32 Go DDR4 - MacOS 13.6.4/MacOS 14.3.1 test Windows 11 - OpenCore 0.9.7 Mod No ACPI
Ancien Hackintosh dédié MAO • Dell Optiplex 9020 i7 4770 3,4GHz - GT710 - 16 Go DDR3 - OS X 10.14.6 - OpenCore 0.8.8
Go to the top of the page
 
+Quote Post
polyzargone
posté 1 May 2019, 02:10
Message #77


Macbidouilleur d'Or !
*****

Groupe : Modérateurs
Messages : 13 720
Inscrit : 11 May 2006
Membre no 60 938



Oui effectivement, je n'avais pas fait attention à ça…

Le mieux serait de fournir un log via la commande suivante pour comprendre quelles entrées sont détectées par Clover :

Code
bdmesg


--------------------
Un MacmacOS 10.15.7 MacBook Air mi-2012 Core i5 1,7 GHz Intel HD 4000 SSD 64 Go
Des Hacks Asus Z170-P - Core i7 6700 3,40 GHz - Sapphire RX 6600 XT 8 Go - 32 Go DDR4 Gigabyte H110M-S2H - Core i5 6600 3,30 GHz - Zotac GTX 1060 6 Go - 32 Go DDR4 Gigabyte GA-H97-HD3 - Core i5 4570 3,20 GHz - MSI GTX 650 Ti 2 Go - 16 Go DDR3 Acer Aspire V3 772G Core i5 4210M 2,60 GHz - Intel HD 4600 + GTX 850M 2 Go (désactivée) - 16 Go DDR3 Dell Latitude e7470 Core i5 6300U 2,40 GHz - Intel HD 520 - 16 Go DDR4 Dell Latitude 7490 Core i7 8650U 1,90 GHz - Intel UHD 620 - 16 Go DDR4 Dell Latitude e7440 Core i7 4600U 2,10 GHz - Intel HD 4400 - 16 Go DDR3 HP Elite 8300 USFF - Core i7 3770S 3,90 GHz - Intel HD 4000 (+ quelques autres...)

Politique vis à vis des outils automatisés et des distributions - Guide d'installation - Tutoriels - Lexique et utilité des Kexts - FAQ Générale du Hackintosh - FAQ des Bootloaders - FAQ des Bootflags - FAQ des problèmes les plus courants - FAQ sur les Mises à jour Majeures sur Hackintosh
Go to the top of the page
 
+Quote Post
deneb
posté 1 May 2019, 14:11
Message #78


Adepte de Macbidouille
*

Groupe : Membres
Messages : 62
Inscrit : 16 Jul 2007
Membre no 90 739



Citation (Patrice Brousseau @ 1 May 2019, 03:08) *
Citation (polyzargone @ 30 Apr 2019, 19:39) *
Citation (deneb @ 30 Apr 2019, 12:04) *
Tu es un lève tôt !


Et un couche tard laugh.gif !

Citation (Patrice Brousseau @ 30 Apr 2019, 21:39) *
Combien de mo/go fait le .PKInstallSandboxManager.... Ça pourrait pas être ça? Qu'en penses-tu Polyzargone.

Édition: ne touche pas à .PKInstallSandboxManager..., vital pour le système à ce que j'ai lu!! En même temps, je n'ai pas ce fichier sur mon Hack???


Moi non plus je n'ai pas le .PKInstallSandboxManager mais dans le doute, on va le laisser.

Je pense plutôt que c'est le .IABootFiles qu'il faudrait supprimer.

Code
drwx------@   8 dlb   staff    272 24 oct  2015 .IABootFiles



Ça fait un bail que ce machin traîne là... 2015!


Bravo! en effet en ouvrant ce dossier .IABootFiles j'ai découvert un fichier "boot.efi". J'ai supprimé le dossier entier et l'entrée "install MacOS from xxx" a disparu du boot Clover. Auparavant j'avais recréé une custom entrée pour le disque de démarrage, et du coup "boot from 860EVO" était revenu en première place, ce qui résolvait déjà une partie du problème (pouvoir remettre le démarrage auto sur ce disque).
A vrai dire je plaide coupable, ce disque est un clone de mon précédent disque, dont j'ai bousillé l'install en tentant de faire une mise à jour de 10.13.4 vers 10.13.6. Comme j'ai des hacks "de sécurité" sur deux autres disques (plus cette entrée fantôme) je me suis perdu dans les reboots, et en plus la MàJ a tenté de reformater le disque en APFS. Du coup mise à jour ratée, et obligé de repartir sur le clone qui marche parfaitement autrement.
J'ai un peu perdu le fil des bidouilles Hackintosh (tant que ça marche je garde ma config), je suis très réticent pour passer en APFS, ça m'a l'air beaucoup plus compliqué que HFS+, surtout pour hacker... Au fait je passerais bien sur Mojave, mais j'ai une carte Nvidia qui pilote deux écrans 4K, et les cartes AMD qui peuvent faire ça (il faut 2 displayport pour être sûr, il me semble avoir lu que MacOS ne gère pas bien le 4K en HDMI) coûtent encore assez cher, même les rares occasions. Si vous avez des plans (je ne joue pas, pas besoin de puissance, juste pouvoir avoir 2 écran en 4K)? Et peut-on installer Mojave en restant en HFS+ ?

Enfin, en attendant je cherche un tuto pour faire cette mise à jour 10.13.4 -->10.13.6 SANS formater en APFS, c'est peut-être sur ces forums, j'ai pas vraiment cherché...
Merci en tous cas pour vos réponses, mon problème est résolu!

Fichier(s) joint(s)
Fichier joint  Capture_d_e__cran_2019_05_01_14.10.01.jpg ( 184.18 Ko ) Nombre de téléchargements : 12
 


--------------------
Mac: Macbook Pro 13' 2015 SSD 256Mo Mem 8Mo
Plusieurs Hacks: Gigabyte Z77HN Wifi core i5, 16Mo, d'abord sous Chimera puis passé sous Clover pour El Capitan puis Sierra, Gigabyte H87N Wifi core i5, 16 Mo, et le plus récent Gigabyte Z97PD3 - Intel Core i5 4690K 16Go et carte graphique Gigabyte Aorus Radeon Rx 570 4Go dans un super boitier Cooler Master Silencio 550 (qui permet d'insérer à chaud dans une baie connectée en SATA un disque 3,5' )
Go to the top of the page
 
+Quote Post
Patrice Broussea...
posté 1 May 2019, 21:48
Message #79


Macbidouilleur de vermeil !
****

Groupe : Membres
Messages : 931
Inscrit : 18 Jan 2015
Lieu : Montréal, Québec
Membre no 193 846



Me semble que si le disque est déjà en HFS+, une mise à jour ne forcera pas la conversion en APFS mais je peux me tromper... Quelqu'un peut confirmer?

Au pire, la source étant TonyMac:

Pour la mise à jour:
"Update scenario using 'startosinstall'

After downloading the 10.13 installer, instead of running it, quit.

Then in Terminal:

Code
/Applications/"Install macOS High Sierra.app"/Contents/Resources/startosinstall --converttoapfs NO --agreetolicense"


Traduction:

Scénario de mise à jour à l'aide de la commande 'startosinstall'

Après avoir téléchargé le fichier d'installation de 10.13, au lieu de démarrer le processus, quitter l'application.

Par la suite, dans le Terminal, tapez:
Code
/Applications/"Install macOS High Sierra.app"/Contents/Resources/startosinstall --converttoapfs NO --agreetolicense"


Ce message a été modifié par Patrice Brousseau - 1 May 2019, 21:50.


--------------------
Nouveau Hackintosh dédié MAO • Gigabyte Designare i7 9700K 3,6GHz - RX560 - 32 Go DDR4 - OS X 10.14.6/Win 10 - OpenCore 0.8.8 Mod No ACPI
Hackintosh Bureau • Dell XPS 8930 i7 8700 3,2GHz - Radeon RX580 - 32 Go DDR4 - MacOS 13.6.4/MacOS 14.3.1 test Windows 11 - OpenCore 0.9.7 Mod No ACPI
Ancien Hackintosh dédié MAO • Dell Optiplex 9020 i7 4770 3,4GHz - GT710 - 16 Go DDR3 - OS X 10.14.6 - OpenCore 0.8.8
Go to the top of the page
 
+Quote Post
polyzargone
posté 1 May 2019, 22:04
Message #80


Macbidouilleur d'Or !
*****

Groupe : Modérateurs
Messages : 13 720
Inscrit : 11 May 2006
Membre no 60 938



Citation (Patrice Brousseau @ 1 May 2019, 21:48) *
Me semble que si le disque est déjà en HFS+, une mise à jour ne forcera pas la conversion en APFS mais je peux me tromper... Quelqu'un peut confirmer?


Je crois que ce n'est plus le cas avec la version 10.13.6 de High Sierra. La conversion est maintenant systématique (et je dirais même qu'elle est conseillée car ça peut faire planter l'install au second reboot).

Citation (Patrice Brousseau @ 1 May 2019, 21:48) *
Scénario de mise à jour à l'aide de la commande 'startosinstall'

Après avoir téléchargé le fichier d'installation de 10.13, au lieu de démarrer le processus, quitter l'application.

Par la suite, dans le Terminal, tapez:
Code
/Applications/"Install macOS High Sierra.app"/Contents/Resources/startosinstall --converttoapfs NO --agreetolicense"


Cette méthode implique, il me semble, que l'on intervienne entre deux reboot pour modifier un fichier dans Système/Bibliothèque (je ne sais plus lequel tongue.gif). Sinon, la conversion a quand même lieue.

Mais pour en revenir à l'APFS, il n'y a pas réellement de raison de s'inquiéter quant à la conversion. C'est un Filesystem qui est utilisé depuis plus de 2 ans sur macOS et même plus sur iOS et je n'ai rien vu sur le net qui parle de catastrophe ou de pertes de données. Bref, je crois qu'on peut dire que le système de fichier est stable, fiable et qu'il a fait ses preuves donc refuser d'y passer, c'est un peu reculer l'inévitable pour rien.

Quant au Hackintosh, ça ne change strictement rien et ça ne le rend pas plus compliqué (ou plus simple laugh.gif). C'est juste un nouveau Filesystem qui est parfaitement géré par Clover depuis bien longtemps.

Le seul cas où je trouve ça gênant pour mon utilisation, c'est que je n'ai plus accès aux partions APFS depuis d'autres OS comme Windows par exemple. Mais des solutions comme APFS for Windows de Paragon Software existent cela dit…


--------------------
Un MacmacOS 10.15.7 MacBook Air mi-2012 Core i5 1,7 GHz Intel HD 4000 SSD 64 Go
Des Hacks Asus Z170-P - Core i7 6700 3,40 GHz - Sapphire RX 6600 XT 8 Go - 32 Go DDR4 Gigabyte H110M-S2H - Core i5 6600 3,30 GHz - Zotac GTX 1060 6 Go - 32 Go DDR4 Gigabyte GA-H97-HD3 - Core i5 4570 3,20 GHz - MSI GTX 650 Ti 2 Go - 16 Go DDR3 Acer Aspire V3 772G Core i5 4210M 2,60 GHz - Intel HD 4600 + GTX 850M 2 Go (désactivée) - 16 Go DDR3 Dell Latitude e7470 Core i5 6300U 2,40 GHz - Intel HD 520 - 16 Go DDR4 Dell Latitude 7490 Core i7 8650U 1,90 GHz - Intel UHD 620 - 16 Go DDR4 Dell Latitude e7440 Core i7 4600U 2,10 GHz - Intel HD 4400 - 16 Go DDR3 HP Elite 8300 USFF - Core i7 3770S 3,90 GHz - Intel HD 4000 (+ quelques autres...)

Politique vis à vis des outils automatisés et des distributions - Guide d'installation - Tutoriels - Lexique et utilité des Kexts - FAQ Générale du Hackintosh - FAQ des Bootloaders - FAQ des Bootflags - FAQ des problèmes les plus courants - FAQ sur les Mises à jour Majeures sur Hackintosh
Go to the top of the page
 
+Quote Post
deneb
posté 2 May 2019, 17:22
Message #81


Adepte de Macbidouille
*

Groupe : Membres
Messages : 62
Inscrit : 16 Jul 2007
Membre no 90 739



Citation (polyzargone @ 1 May 2019, 23:04) *
Citation (Patrice Brousseau @ 1 May 2019, 21:48) *
Me semble que si le disque est déjà en HFS+, une mise à jour ne forcera pas la conversion en APFS mais je peux me tromper... Quelqu'un peut confirmer?


Je crois que ce n'est plus le cas avec la version 10.13.6 de High Sierra. La conversion est maintenant systématique (et je dirais même qu'elle est conseillée car ça peut faire planter l'install au second reboot).

Citation (Patrice Brousseau @ 1 May 2019, 21:48) *
Scénario de mise à jour à l'aide de la commande 'startosinstall'

Après avoir téléchargé le fichier d'installation de 10.13, au lieu de démarrer le processus, quitter l'application.

Par la suite, dans le Terminal, tapez:
Code
/Applications/"Install macOS High Sierra.app"/Contents/Resources/startosinstall --converttoapfs NO --agreetolicense"


Cette méthode implique, il me semble, que l'on intervienne entre deux reboot pour modifier un fichier dans Système/Bibliothèque (je ne sais plus lequel tongue.gif ). Sinon, la conversion a quand même lieue.

Mais pour en revenir à l'APFS, il n'y a pas réellement de raison de s'inquiéter quant à la conversion. C'est un Filesystem qui est utilisé depuis plus de 2 ans sur macOS et même plus sur iOS et je n'ai rien vu sur le net qui parle de catastrophe ou de pertes de données. Bref, je crois qu'on peut dire que le système de fichier est stable, fiable et qu'il a fait ses preuves donc refuser d'y passer, c'est un peu reculer l'inévitable pour rien.

Quant au Hackintosh, ça ne change strictement rien et ça ne le rend pas plus compliqué (ou plus simple laugh.gif ). C'est juste un nouveau Filesystem qui est parfaitement géré par Clover depuis bien longtemps.

Le seul cas où je trouve ça gênant pour mon utilisation, c'est que je n'ai plus accès aux partions APFS depuis d'autres OS comme Windows par exemple. Mais des solutions comme APFS for Windows de Paragon Software existent cela dit…


OK merci pour les réponses. Je trouve que ne plus avoir d'accès à partir de Windows (ou d'anciennes install de MacOSX) est un inconvénient en cas de pépin. Pour clover il faut ajouter APFS.EFI je suppose. Perso, pour lce qui est du filesystem, APFS me semble beaucoup plus compliqué avec ces containers, etc. Je passerai à APFS avec Mojave, mais pour l'instant je suis obligé de rester sur High Sierra because carte Nvidia...


--------------------
Mac: Macbook Pro 13' 2015 SSD 256Mo Mem 8Mo
Plusieurs Hacks: Gigabyte Z77HN Wifi core i5, 16Mo, d'abord sous Chimera puis passé sous Clover pour El Capitan puis Sierra, Gigabyte H87N Wifi core i5, 16 Mo, et le plus récent Gigabyte Z97PD3 - Intel Core i5 4690K 16Go et carte graphique Gigabyte Aorus Radeon Rx 570 4Go dans un super boitier Cooler Master Silencio 550 (qui permet d'insérer à chaud dans une baie connectée en SATA un disque 3,5' )
Go to the top of the page
 
+Quote Post
polyzargone
posté 2 May 2019, 17:50
Message #82


Macbidouilleur d'Or !
*****

Groupe : Modérateurs
Messages : 13 720
Inscrit : 11 May 2006
Membre no 60 938



Citation (deneb @ 2 May 2019, 17:22) *
Je trouve que ne plus avoir d'accès à partir de Windows (ou d'anciennes install de MacOSX) est un inconvénient en cas de pépin.


Je parle de la partition où est installé le Système, pas de la partition EFI qui elle, quelque soit le Filesystem, existe toujours. Elle est donc accessible depuis Windows (ou autres) comme avant et avec les mêmes méthodes wink.gif :

Méthodes pour afficher le contenu de la partition EFI

Modifier la partition EFI depuis Windows 10

Citation (deneb @ 2 May 2019, 17:22) *
Pour clover il faut ajouter APFS.EFI je suppose.


Oui. Le driver ApfsDriverLoader-64.efi est inclus dans Clover depuis un bon moment.


--------------------
Un MacmacOS 10.15.7 MacBook Air mi-2012 Core i5 1,7 GHz Intel HD 4000 SSD 64 Go
Des Hacks Asus Z170-P - Core i7 6700 3,40 GHz - Sapphire RX 6600 XT 8 Go - 32 Go DDR4 Gigabyte H110M-S2H - Core i5 6600 3,30 GHz - Zotac GTX 1060 6 Go - 32 Go DDR4 Gigabyte GA-H97-HD3 - Core i5 4570 3,20 GHz - MSI GTX 650 Ti 2 Go - 16 Go DDR3 Acer Aspire V3 772G Core i5 4210M 2,60 GHz - Intel HD 4600 + GTX 850M 2 Go (désactivée) - 16 Go DDR3 Dell Latitude e7470 Core i5 6300U 2,40 GHz - Intel HD 520 - 16 Go DDR4 Dell Latitude 7490 Core i7 8650U 1,90 GHz - Intel UHD 620 - 16 Go DDR4 Dell Latitude e7440 Core i7 4600U 2,10 GHz - Intel HD 4400 - 16 Go DDR3 HP Elite 8300 USFF - Core i7 3770S 3,90 GHz - Intel HD 4000 (+ quelques autres...)

Politique vis à vis des outils automatisés et des distributions - Guide d'installation - Tutoriels - Lexique et utilité des Kexts - FAQ Générale du Hackintosh - FAQ des Bootloaders - FAQ des Bootflags - FAQ des problèmes les plus courants - FAQ sur les Mises à jour Majeures sur Hackintosh
Go to the top of the page
 
+Quote Post
Patrice Broussea...
posté 2 May 2019, 21:55
Message #83


Macbidouilleur de vermeil !
****

Groupe : Membres
Messages : 931
Inscrit : 18 Jan 2015
Lieu : Montréal, Québec
Membre no 193 846



@polyzargone: je pense que la méthode du terminal devrait marcher si deneb télécharge High Sierra au complet (et non pas seulement le combo ou l'incrémental). Est-ce que je me trompe?

Ce message a été modifié par Patrice Brousseau - 2 May 2019, 21:55.


--------------------
Nouveau Hackintosh dédié MAO • Gigabyte Designare i7 9700K 3,6GHz - RX560 - 32 Go DDR4 - OS X 10.14.6/Win 10 - OpenCore 0.8.8 Mod No ACPI
Hackintosh Bureau • Dell XPS 8930 i7 8700 3,2GHz - Radeon RX580 - 32 Go DDR4 - MacOS 13.6.4/MacOS 14.3.1 test Windows 11 - OpenCore 0.9.7 Mod No ACPI
Ancien Hackintosh dédié MAO • Dell Optiplex 9020 i7 4770 3,4GHz - GT710 - 16 Go DDR3 - OS X 10.14.6 - OpenCore 0.8.8
Go to the top of the page
 
+Quote Post
polyzargone
posté 4 May 2019, 22:58
Message #84


Macbidouilleur d'Or !
*****

Groupe : Modérateurs
Messages : 13 720
Inscrit : 11 May 2006
Membre no 60 938



Citation (Patrice Brousseau @ 2 May 2019, 21:55) *
@polyzargone: je pense que la méthode du terminal devrait marcher si deneb télécharge High Sierra au complet (et non pas seulement le combo ou l'incrémental). Est-ce que je me trompe?


Honnêtement, je n'ai jamais essayé tongue.gif. À voir donc…


--------------------
Un MacmacOS 10.15.7 MacBook Air mi-2012 Core i5 1,7 GHz Intel HD 4000 SSD 64 Go
Des Hacks Asus Z170-P - Core i7 6700 3,40 GHz - Sapphire RX 6600 XT 8 Go - 32 Go DDR4 Gigabyte H110M-S2H - Core i5 6600 3,30 GHz - Zotac GTX 1060 6 Go - 32 Go DDR4 Gigabyte GA-H97-HD3 - Core i5 4570 3,20 GHz - MSI GTX 650 Ti 2 Go - 16 Go DDR3 Acer Aspire V3 772G Core i5 4210M 2,60 GHz - Intel HD 4600 + GTX 850M 2 Go (désactivée) - 16 Go DDR3 Dell Latitude e7470 Core i5 6300U 2,40 GHz - Intel HD 520 - 16 Go DDR4 Dell Latitude 7490 Core i7 8650U 1,90 GHz - Intel UHD 620 - 16 Go DDR4 Dell Latitude e7440 Core i7 4600U 2,10 GHz - Intel HD 4400 - 16 Go DDR3 HP Elite 8300 USFF - Core i7 3770S 3,90 GHz - Intel HD 4000 (+ quelques autres...)

Politique vis à vis des outils automatisés et des distributions - Guide d'installation - Tutoriels - Lexique et utilité des Kexts - FAQ Générale du Hackintosh - FAQ des Bootloaders - FAQ des Bootflags - FAQ des problèmes les plus courants - FAQ sur les Mises à jour Majeures sur Hackintosh
Go to the top of the page
 
+Quote Post
Scrouik
posté 17 May 2019, 20:58
Message #85


Nouveau Membre


Groupe : Membres
Messages : 12
Inscrit : 6 May 2019
Membre no 207 971



Citation (Yellocab @ 9 Dec 2017, 22:45) *
Hello

impossible de cacher Preboot et FireVault. En fait ces 2 plus mon disque de démarrage ont la meme UUID. J'ai du rater un truc non? Après Clover configurator le propose de choisir directement les volumes depuis l'interface. J'ose pas trop mais c'est peut être la seule issue avec les recentes mises a jour.

Si qqun peut me dire avant que je foire tout

Danke



J'ai trouvé la solution au cas ou ....

Fichier joint  Capture_d___e__cran_2019_05_17_a___21.55.46.png ( 32.71 Ko ) Nombre de téléchargements : 34


--------------------
Hack • Asus Z97-P - Core i5-4570 3,30 GHz - NVidia GeForce GTX 960 - 16 Go DDR3 - macOS 10.13.6(17G6030) / Win 7
Go to the top of the page
 
+Quote Post
polyzargone
posté 17 May 2019, 21:31
Message #86


Macbidouilleur d'Or !
*****

Groupe : Modérateurs
Messages : 13 720
Inscrit : 11 May 2006
Membre no 60 938



Post #27


--------------------
Un MacmacOS 10.15.7 MacBook Air mi-2012 Core i5 1,7 GHz Intel HD 4000 SSD 64 Go
Des Hacks Asus Z170-P - Core i7 6700 3,40 GHz - Sapphire RX 6600 XT 8 Go - 32 Go DDR4 Gigabyte H110M-S2H - Core i5 6600 3,30 GHz - Zotac GTX 1060 6 Go - 32 Go DDR4 Gigabyte GA-H97-HD3 - Core i5 4570 3,20 GHz - MSI GTX 650 Ti 2 Go - 16 Go DDR3 Acer Aspire V3 772G Core i5 4210M 2,60 GHz - Intel HD 4600 + GTX 850M 2 Go (désactivée) - 16 Go DDR3 Dell Latitude e7470 Core i5 6300U 2,40 GHz - Intel HD 520 - 16 Go DDR4 Dell Latitude 7490 Core i7 8650U 1,90 GHz - Intel UHD 620 - 16 Go DDR4 Dell Latitude e7440 Core i7 4600U 2,10 GHz - Intel HD 4400 - 16 Go DDR3 HP Elite 8300 USFF - Core i7 3770S 3,90 GHz - Intel HD 4000 (+ quelques autres...)

Politique vis à vis des outils automatisés et des distributions - Guide d'installation - Tutoriels - Lexique et utilité des Kexts - FAQ Générale du Hackintosh - FAQ des Bootloaders - FAQ des Bootflags - FAQ des problèmes les plus courants - FAQ sur les Mises à jour Majeures sur Hackintosh
Go to the top of the page
 
+Quote Post
marlouin
posté 7 Jul 2019, 18:31
Message #87


Macbidouilleur de bronze !
**

Groupe : Membres
Messages : 290
Inscrit : 16 Jan 2006
Membre no 53 615



Merci ! J'étais parti sur la méthode clean et qui t'apprend des choses, de polyzargone mais j'ai buté : pas trouvé
Citation
Checking volume "Preboot" …
edit: ah hum OK je viens de voir la soluce un peu plus haut
Et puis je suis tombé sur la méthode feignasse qui m'arrange bien avec mes 3 installs de Mojave c'est plus facile…

Par contre je suis curieux de savoir, poly. Comment tu fais tes screenshots clean de Clover ? C'est une fonction intégrée ?

Ce message a été modifié par marlouin - 7 Jul 2019, 18:46.


--------------------
Mac Studio 2022 (M1 max, 32 cœurs graphiques, 64go)

Hackintosh : {OpenCore} GA-Z97X-Gaming 3 | i7 4790 | Radeon RX 580 | Big Sur + Linux Mint 21 + Mojave
Hacks pour les amis-famille : {OpenCore} Lenovo Thinkpad T470, {Clover} Lenovo Thinkcentre M73, {OpenCore} Lenovo X1 Yoga (gen 2)
Go to the top of the page
 
+Quote Post
polyzargone
posté 7 Jul 2019, 19:29
Message #88


Macbidouilleur d'Or !
*****

Groupe : Modérateurs
Messages : 13 720
Inscrit : 11 May 2006
Membre no 60 938



Pour les screenshots, il faut taper F10 mais ça ne fonctionne que dans l'interface de Clover et pas après (pendant le boot par exemple).

Pour l'APFS et les entrées, poste ton bdmsg stp.


--------------------
Un MacmacOS 10.15.7 MacBook Air mi-2012 Core i5 1,7 GHz Intel HD 4000 SSD 64 Go
Des Hacks Asus Z170-P - Core i7 6700 3,40 GHz - Sapphire RX 6600 XT 8 Go - 32 Go DDR4 Gigabyte H110M-S2H - Core i5 6600 3,30 GHz - Zotac GTX 1060 6 Go - 32 Go DDR4 Gigabyte GA-H97-HD3 - Core i5 4570 3,20 GHz - MSI GTX 650 Ti 2 Go - 16 Go DDR3 Acer Aspire V3 772G Core i5 4210M 2,60 GHz - Intel HD 4600 + GTX 850M 2 Go (désactivée) - 16 Go DDR3 Dell Latitude e7470 Core i5 6300U 2,40 GHz - Intel HD 520 - 16 Go DDR4 Dell Latitude 7490 Core i7 8650U 1,90 GHz - Intel UHD 620 - 16 Go DDR4 Dell Latitude e7440 Core i7 4600U 2,10 GHz - Intel HD 4400 - 16 Go DDR3 HP Elite 8300 USFF - Core i7 3770S 3,90 GHz - Intel HD 4000 (+ quelques autres...)

Politique vis à vis des outils automatisés et des distributions - Guide d'installation - Tutoriels - Lexique et utilité des Kexts - FAQ Générale du Hackintosh - FAQ des Bootloaders - FAQ des Bootflags - FAQ des problèmes les plus courants - FAQ sur les Mises à jour Majeures sur Hackintosh
Go to the top of the page
 
+Quote Post
marlouin
posté 8 Jul 2019, 12:41
Message #89


Macbidouilleur de bronze !
**

Groupe : Membres
Messages : 290
Inscrit : 16 Jan 2006
Membre no 53 615



En fait j'ai depuis compris le fait d'aller rechercher le numéro du volume comme tu l'as indiqué précédemment. Sauf que j'ai 3 partitions Mojave donc 3 fois preboot… Et je sais pas les distinguer. J'avais commencé avec ma partition "Mojave test" uuid: CFE51FC4-964F-3C1E-AB65-7B7608E7C4BB

CODE
0:100 0:100 MemLog inited, TSC freq: 3599997761
0:100 0:000 CPU was calibrated with ACPI PM Timer
0:100 0:000
0:100 0:000 Now is 7.7.2019, 16:0:26 (GMT)
0:100 0:000 Starting Clover revision: 4972 on American Megatrends EFI
0:100 0:000 Build with: [Args: -D NO_GRUB_DRIVERS_EMBEDDED | -D NO_GRUB_DRIVERS_EMBEDDED -D USE_LOW_EBDA -D HAVE_LEGACY_EMURUNTIMEDXE -a X64 -b RELEASE -t XCODE8 -n 5 | OS: 10.13.6 | XCODE: 10.1]
0:100 0:000 SelfDevicePath=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,428345B2-C026-4652-BCBF-AEEE8B6B6C23,0x28,0x64000) @D062B718
0:100 0:000 SelfDirPath = \EFI\BOOT
0:100 0:000 === [ Get Smbios ] ========================================
0:100 0:000 Type 16 Index = 0
0:100 0:000 Total Memory Slots Count = 4
0:100 0:000 Type 17 Index = 0
0:100 0:000 SmbiosTable.Type17->Speed = 1333MHz
0:100 0:000 SmbiosTable.Type17->Size = 8192MB
0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0
0:100 0:000 SmbiosTable.Type17->Vendor = 1315
0:100 0:000 SmbiosTable.Type17->SerialNumber = A6261BF3
0:100 0:000 SmbiosTable.Type17->PartNumber = BLT8G3D1608DT1TX0.
0:100 0:000 Type 17 Index = 1
0:100 0:000 SmbiosTable.Type17->Speed = 1333MHz
0:100 0:000 SmbiosTable.Type17->Size = 8192MB
0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 1 ChannelA-DIMM1
0:100 0:000 SmbiosTable.Type17->Vendor = 1315
0:100 0:000 SmbiosTable.Type17->SerialNumber = A6261C10
0:100 0:000 SmbiosTable.Type17->PartNumber = BLT8G3D1608DT1TX0.
0:100 0:000 Type 17 Index = 2
0:100 0:000 SmbiosTable.Type17->Speed = 1333MHz
0:100 0:000 SmbiosTable.Type17->Size = 8192MB
0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM0
0:100 0:000 SmbiosTable.Type17->Vendor = 1315
0:100 0:000 SmbiosTable.Type17->SerialNumber = A70D6004
0:100 0:000 SmbiosTable.Type17->PartNumber = BLT8G3D1608DT1TX0.
0:100 0:000 Type 17 Index = 3
0:100 0:000 SmbiosTable.Type17->Speed = 1333MHz
0:100 0:000 SmbiosTable.Type17->Size = 8192MB
0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 3 ChannelB-DIMM1
0:100 0:000 SmbiosTable.Type17->Vendor = 1315
0:100 0:000 SmbiosTable.Type17->SerialNumber = A70D5FD7
0:100 0:000 SmbiosTable.Type17->PartNumber = BLT8G3D1608DT1TX0.
0:100 0:000 Boot status=0
0:100 0:000 Running on: 'H97-D3H' with board 'H97-D3H-CF'
0:100 0:000 === [ GetCPUProperties ] ==================================
0:100 0:000 CPU Vendor = 756E6547 Model=306C3
0:100 0:000 The CPU supported SSE4.1
0:100 0:000 BrandString = Intel® Core™ i7-4790 CPU @ 3.60GHz
0:100 0:000 The CPU supported turbo
0:100 0:000 MSR 0x35 40008
0:100 0:000 MSR 0xE2 before patch 1E000404
0:100 0:000 MSR 0xCE 00080838_F3012400
0:100 0:000 corrected FLEX_RATIO = 0
0:100 0:000 FSBFrequency = 100 MHz, DMI FSBFrequency = 100 MHz, Corrected FSBFrequency = 100 MHz
0:100 0:000 MaxDiv/MinDiv: 36.0/8
0:100 0:000 Turbo: 38/39/40/40
0:100 0:000 Features: 0xBFEBFBFF
0:100 0:000 Threads: 8
0:100 0:000 Cores: 4
0:100 0:000 FSB: 100 MHz
0:100 0:000 CPU: 3600 MHz
0:100 0:000 TSC: 3600 MHz
0:100 0:000 PIS: 100 MHz
0:100 0:000 ExternalClock: 25 MHz
0:100 0:000 === [ GetDevices ] ========================================
0:100 0:000 PCI (00|00:00.00) : 8086 0C00 class=060000
0:100 0:000 PCI (00|00:01.00) : 8086 0C01 class=060400
0:100 0:000 PCI (00|01:00.00) : 1002 67DF class=030000
0:100 0:000 - GFX: Model=AMD Radeon RX 480 (ATI/AMD)
0:100 0:000 PCI (00|01:00.01) : 1002 AAF0 class=040300
0:100 0:000 - HDMI Audio:
0:100 0:000 PCI (00|00:14.00) : 8086 8CB1 class=0C0330
0:100 0:000 PCI (00|00:16.00) : 8086 8CBA class=078000
0:100 0:000 PCI (00|00:19.00) : 8086 153B class=020000
0:100 0:000 - LAN: 0 Vendor=Intel
0:100 0:000 PCI (00|00:1A.00) : 8086 8CAD class=0C0320
0:100 0:000 PCI (00|00:1B.00) : 8086 8CA0 class=040300
0:100 0:000 PCI (00|00:1C.00) : 8086 8C90 class=060400
0:100 0:000 PCI (00|00:1C.03) : 8086 8C96 class=060400
0:100 0:000 PCI (00|03:00.00) : 8086 244E class=060401
0:100 0:000 PCI (00|00:1D.00) : 8086 8CA6 class=0C0320
0:100 0:000 PCI (00|00:1F.00) : 8086 8CC6 class=060100
0:100 0:000 PCI (00|00:1F.02) : 8086 8C82 class=010601
0:100 0:000 PCI (00|00:1F.03) : 8086 8CA2 class=0C0500
0:100 0:000 === [ GetDefaultSettings ] ================================
0:100 0:000 Clover load options size = 0 bytes
0:104 0:004 EFI\CLOVER\config.plist loaded: Success
0:104 0:000 === [ GetListOfThemes ] ===================================
0:107 0:002 - [00]: BGM
0:113 0:006 - [01]: EMBEDDED
0:114 0:001 - [01]: Mojave
0:119 0:005 - [02]: Clovy
0:129 0:009 - [03]: RANDOM
0:131 0:001 - [03]: YosemiteLogin
0:135 0:004 - [04]: OS_ONE
0:137 0:002 - [05]: a_simple_theme
0:140 0:002 === [ Found config plists ] ===============================
0:141 0:001 - config.plist
0:141 0:000 === [ GetEarlyUserSettings ] ==============================
0:141 0:000 timeout set to 5
0:141 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:141 0:000 KernelXCPM: enabled
0:141 0:000 KextsToPatch: 5 requested
0:141 0:000 - [00]: AppleAHCIPort (External icons patch) :: BinPatch :: data len: 8
0:141 0:000 - [01]: IOAHCIBlockStorage (TRIM Enabler) :: BinPatch :: data len: 11
0:141 0:000 - [02]: AppleUSBXHCIPCI (10.11 change 15 port limit to 30) :: MatchOS: 10.11.x :: BinPatch :: data len: 7
0:141 0:000 - [03]: AppleUSBXHCIPCI (10.12 change 15 port limit to 20) :: MatchOS: 10.12.x :: BinPatch :: data len: 7
0:141 0:000 - [04]: AppleUSBXHCIPCI (10.13 change 15 port limit to 20) :: MatchOS: 10.13.x :: BinPatch :: data len: 4
0:141 0:000 Default theme: Mojave
0:141 0:000 === [ LoadDrivers ] =======================================
0:143 0:002 Loading ApfsDriverLoader-64.efi status=Success
0:145 0:001 - driver needs connecting
0:145 0:000 Loading AptioMemoryFix-64.efi status=Success
0:147 0:001 Loading AudioDxe-64.efi status=Success
0:149 0:001 - driver needs connecting
0:149 0:000 Loading DataHubDxe-64.efi status=Success
0:154 0:005 Loading FSInject-64.efi status=Success
0:155 0:001 Loading SMCHelper-64.efi status=Success
0:157 0:001 Loading HFSPlus-64.efi status=Success
0:159 0:002 - driver needs connecting
0:159 0:000 3 drivers needs connecting ...
0:159 0:000 PlatformDriverOverrideProtocol->GetDriver overriden
0:159 0:000 HFS+ driver loaded
0:159 0:000 APFS driver loaded
0:159 0:000 Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
6:137 5:977 === [ InitScreen ] ========================================
6:137 0:000 Console modes reported: 6, available modes:
6:137 0:000 - [01]: 80x25 (current mode)
6:137 0:000 - [02]: 80x50
6:137 0:000 - [03]: 100x31
6:137 0:000 - [04]: 128x30
6:137 0:000 - [05]: 100x60
6:137 0:000 - [06]: 120x50
6:137 0:000 SetMaxResolution: found best mode 6: 1920x1200
6:165 0:027 Video mode change to mode #6: Success
6:165 0:000 - set
6:165 0:000 reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,428345B2-C026-4652-BCBF-AEEE8B6B6C23,0x28,0x64000)
6:165 0:000 Using embedded font: Success
6:744 0:578 === [ GetMacAddress ] =====================================
6:744 0:000 MAC address of LAN #0= FC:AA:14:30:5B:F3:
6:744 0:000 === [ ScanSPD ] ===========================================
6:744 0:000 Scanning SMBus [8086:8CA2], mmio: 0xF7F34004, ioport: 0xF000, hostc: 0x11
6:762 0:018 Slot: 0 Type 24 8192MB 1600MHz Vendor=Crucial Technology PartNo=BLT8G3D1608DT1TX0. SerialNo=0A060206010B0F03
6:781 0:018 Slot: 1 Type 24 8192MB 1600MHz Vendor=Crucial Technology PartNo=BLT8G3D1608DT1TX0. SerialNo=0A060206010C0100
6:800 0:018 Slot: 2 Type 24 8192MB 1600MHz Vendor=Crucial Technology PartNo=BLT8G3D1608DT1TX0. SerialNo=0A07000D06000004
6:818 0:018 Slot: 3 Type 24 8192MB 1600MHz Vendor=Crucial Technology PartNo=BLT8G3D1608DT1TX0. SerialNo=0A07000D050F0D07
6:819 0:000 === [ GetAcpiTablesList ] =================================
6:819 0:000 Get Acpi Tables List from RSDT:
6:819 0:000 - [00]: FACP A M I len=132
6:819 0:000 - [01]: APIC A M I len=146
6:819 0:000 - [02]: FPDT A M I len=68
6:819 0:000 - [03]: SSDT Ther_Rvp len=3054
6:819 0:000 - [04]: SSDT Cpu0Ist len=1337
6:819 0:000 - [05]: SSDT CpuSsdt len=2932
6:819 0:000 - [06]: MCFG A M I len=60
6:819 0:000 - [07]: HPET A M I len=56
6:819 0:000 - [08]: SSDT SataTabl len=877
6:819 0:000 - [09]: SSDT SaSsdt len=23390
6:819 0:000 - [10]: BGRT A M I len=56
6:819 0:000 - [11]: DMAR BDW len=128
6:819 0:000 Calibrated TSC Frequency = 3599997761 = 3599MHz
6:819 0:000 === [ GetUserSettings ] ===================================
6:819 0:000 USB FixOwnership: yes
6:819 0:000 Dropping 2 tables:
6:819 0:000 - [00]: Drop table signature="MATS" (5354414D)
6:819 0:000 - set table: 5354414D, 0 to drop: no
6:819 0:000 - [01]: Drop table signature="DMAR" (52414D44)
6:819 0:000 - set table: 52414D44, 0 to drop: yes
6:819 0:000 - final DSDT Fix mask=00008000
6:819 0:000 EnableC6: yes
6:819 0:000 Using ProductName from clover: iMac14,2
6:819 0:000 BiosVersion: not set, Using BiosVersion from clover
6:819 0:000 BiosVersion: IM142.88Z.F000.B00.1905251339
6:819 0:000 BiosReleaseDate: 05/25/2019
6:819 0:000 Using EfiVersion from clover: 138.0.0.0.0
6:819 0:000 Using FirmwareFeatures from clover: 0xE00FE137
6:819 0:000 Using FirmwareFeaturesMask from clover: 0xFF1FFF3F
6:819 0:000 Using PlatformFeature from clover: 0x1
6:820 0:000 === [ Found DSDT tables ] =================================
6:922 0:102 === [ ScanVolumes ] =======================================
6:922 0:000 Found 34 volumes with blockIO
6:922 0:000 - [00]: Volume: PciRoot(0x0)\Pci(0x1A,0x0)\USB(0x1,0x0)\USB(0x6,0x0)
6:923 0:001 USB volume
6:923 0:000 USB volume
6:923 0:000 - [01]: Volume: PciRoot(0x0)\Pci(0x1A,0x0)\USB(0x1,0x0)\USB(0x6,0x0)\HD(1,MBR,0x00000000,0x2000,0x1DF5800)
6:924 0:001 USB volume
6:924 0:000 USB volume
7:070 0:145 - [02]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)
7:070 0:000 - [03]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)
7:071 0:000 - [04]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)
7:071 0:000 - [05]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)
7:072 0:000 - [06]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)
7:072 0:000 Found optical drive
7:072 0:000 - [07]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0xFFFF,0x0)
7:072 0:000 - [08]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,27BCFD31-7551-4DEB-85E5-D4C9F0311372,0x28,0x64000)
7:073 0:000 Result of bootcode detection: bootable unknown (legacy)
7:101 0:028 - [09]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,531CBD13-4295-45B0-B8C8-67E2437E7269,0x64028,0x1C61642E0)
7:102 0:000 - [10]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(3,GPT,3EA16328-7113-43EB-9324-48F40E598263,0x1C61C8308,0x135F20)
7:102 0:000 - [11]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(4,GPT,390C2C9D-9E66-42EA-B813-68B22FF9B305,0x1C62FE228,0xB90DC60)
7:103 0:000 Result of bootcode detection: bootable unknown (legacy)
7:103 0:000 - [12]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,428345B2-C026-4652-BCBF-AEEE8B6B6C23,0x28,0x64000)
7:103 0:000 Result of bootcode detection: bootable unknown (legacy)
7:111 0:007 This is SelfVolume !!
7:111 0:000 - [13]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,A0A21095-9D3C-4A4D-BAC3-5DA21F32E6D6,0x64028,0x1D161920)
7:112 0:000 Result of bootcode detection: bootable unknown (legacy)
7:112 0:000 - [14]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,5B4EAF56-A0D1-48AF-8063-6ABD6252B470,0x28,0x64000)
7:112 0:000 Result of bootcode detection: bootable unknown (legacy)
7:137 0:024 - [15]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,E10FA184-A56B-4990-A8B7-FD5FE90308A9,0x64028,0xE8D64860)
7:138 0:000 - [16]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(1,GPT,84C0407C-58E1-4801-B3AE-20B3B601DF2D,0x28,0x64000)
7:138 0:000 Result of bootcode detection: bootable unknown (legacy)
7:142 0:004 - [17]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(2,GPT,1E451A83-76FC-414A-878C-15FEBA7DB9FA,0x64028,0x1D1B67E60)
7:143 0:000 - [18]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0xFFFF,0x0)\HD(1,GPT,75EAD2B3-0A90-4D7D-BB07-752059E245D4,0x28,0x64000)
7:144 0:000 Result of bootcode detection: bootable unknown (legacy)
7:167 0:023 - [19]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0xFFFF,0x0)\HD(2,GPT,581C8D59-4EB1-434D-B53D-29A0078514C8,0x64028,0x1CBE860A0)
7:168 0:000 Result of bootcode detection: bootable unknown (legacy)
7:168 0:000 - [20]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0xFFFF,0x0)\HD(3,GPT,BA657512-AAC2-41CE-B383-E2E6BE492016,0x1CBEEA0C8,0x40000)
7:169 0:000 - [21]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0xFFFF,0x0)\HD(4,GPT,B79C9629-C844-4977-B9D1-688F70F1C35D,0x1CBF2A0C8,0x5CE1DC0)
7:169 0:000 Result of bootcode detection: bootable unknown (legacy)
7:169 0:000 - [22]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(4,GPT,390C2C9D-9E66-42EA-B813-68B22FF9B305,0x1C62FE228,0xB90DC60)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,E982F251E8D5D640AED9B89B5BB8EA4B)
7:169 0:000 - [23]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(4,GPT,390C2C9D-9E66-42EA-B813-68B22FF9B305,0x1C62FE228,0xB90DC60)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,75FF9963D3286738B279C72F76628E23)
7:169 0:000 - [24]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(4,GPT,390C2C9D-9E66-42EA-B813-68B22FF9B305,0x1C62FE228,0xB90DC60)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,81BBA848D976AF4A912F72652537E010)
7:169 0:000 - [25]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(4,GPT,390C2C9D-9E66-42EA-B813-68B22FF9B305,0x1C62FE228,0xB90DC60)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,C0A032DB0D504C4D8BBB9C6F1A8D9BA7)
7:169 0:000 - [26]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,A0A21095-9D3C-4A4D-BAC3-5DA21F32E6D6,0x64028,0x1D161920)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,984D960C57502343A24EA70B48EDC1FD)
7:169 0:000 - [27]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,A0A21095-9D3C-4A4D-BAC3-5DA21F32E6D6,0x64028,0x1D161920)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,84B925A1F081053796F7D30CF3137B66)
7:169 0:000 - [28]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,A0A21095-9D3C-4A4D-BAC3-5DA21F32E6D6,0x64028,0x1D161920)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,DC25771B066E714D8BA83F79C70E3D8C)
7:169 0:000 - [29]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,A0A21095-9D3C-4A4D-BAC3-5DA21F32E6D6,0x64028,0x1D161920)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,670E02239F0E374F8F0B176984349FBE)
7:169 0:000 - [30]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0xFFFF,0x0)\HD(4,GPT,B79C9629-C844-4977-B9D1-688F70F1C35D,0x1CBF2A0C8,0x5CE1DC0)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,E5716B324AF90C40B8901247B7618A0D)
7:169 0:000 - [31]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0xFFFF,0x0)\HD(4,GPT,B79C9629-C844-4977-B9D1-688F70F1C35D,0x1CBF2A0C8,0x5CE1DC0)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,C41FE5CF4F961E3CAB657B7608E7C4BB)
7:169 0:000 - [32]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0xFFFF,0x0)\HD(4,GPT,B79C9629-C844-4977-B9D1-688F70F1C35D,0x1CBF2A0C8,0x5CE1DC0)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,B117E1A51DB1C642B5DBCE096F9F8266)
7:170 0:000 - [33]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0xFFFF,0x0)\HD(4,GPT,B79C9629-C844-4977-B9D1-688F70F1C35D,0x1CBF2A0C8,0x5CE1DC0)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,283F1E456B307848AF2FAB45DF2C0CC1)
7:170 0:000 found 2 handles with audio
7:170 0:000 got index=0
7:171 0:000 got volume 70
7:171 0:000 === [ InitTheme ] =========================================
7:171 0:000 use daylight theme
7:179 0:008 Using theme 'Mojave' (EFI\CLOVER\themes\Mojave)
7:179 0:000 theme Mojave defined in NVRAM found and theme.plist parsed
7:179 0:000 OS main and drive as badge
7:182 0:003 Channels: 1 Sample rate: 44100 Hz Bits: 16
7:182 0:000 output to channel 0 with volume 70, len=228736
7:182 0:000 sound channels=1 bits=16 freq=44100
10:378 3:195 free sound
10:378 0:000 sound play end with status=Success
10:380 0:002 Loading font from ThemeDir: Success
10:380 0:000 theme inited
10:380 0:000 Chosen theme Mojave
10:381 0:000 after NVRAM boot-args=-v kext-dev-mode=1
10:381 0:000 === [ Dump SMC keys from NVRAM ] ==========================
10:381 0:000 found AppleSMC protocol
10:436 0:054 Registered 16 SMC keys
10:437 0:001 === [ ScanLoader ] ========================================
10:437 0:000 - [01]: ''
10:480 0:043 - [08]: 'EFI'
10:503 0:022 AddLoaderEntry for Volume Name=EFI
10:503 0:000 skipped because entry is hidden
10:503 0:000 - [09]: 'Carbone'
10:551 0:048 AddLoaderEntry for Volume Name=Carbone
10:580 0:029 Check if volume Is Hibernated:
10:580 0:000 Check sleep image 'by signature':
10:636 0:055 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success
10:636 0:000 SleepImage name from pref: ImageVolume = 'Carbone', ImageName = '\private\var\vm\sleepimage'
10:661 0:025 sleepimage not found -> Not Found
10:661 0:000 hibernated: no - sign
10:703 0:042 - [10]: 'Recovery HD'
10:704 0:000 AddLoaderEntry for Volume Name=Recovery HD
10:762 0:058 - [12]: 'EFI'
10:808 0:045 AddLoaderEntry for Volume Name=EFI
10:808 0:000 skipped because entry is hidden
10:808 0:000 - [14]: 'EFI'
10:846 0:037 - [15]: 'Jardin'
10:868 0:022 - [16]: 'EFI'
10:890 0:022 - [17]: 'Squelette'
10:913 0:022 - [18]: 'EFI'
10:935 0:022 - [20]: 'Boot OS X'
10:958 0:022 - [22]: 'Preboot'
10:968 0:009 AddLoaderEntry for Volume Name=Preboot
10:988 0:020 Check if volume Is Hibernated:
10:988 0:000 Check sleep image 'by signature':
10:989 0:000 using default sleep image name = \private\var\vm\sleepimage
10:989 0:000 sleepimage not found -> Not Found
10:989 0:000 hibernated: no - sign
10:992 0:003 AddLoaderEntry for Volume Name=Preboot
11:039 0:047 - [23]: 'Carbone 2'
11:242 0:202 AddLoaderEntry for Volume Name=Carbone 2
11:280 0:038 Check if volume Is Hibernated:
11:280 0:000 Check sleep image 'by signature':
11:389 0:108 read prefs \Library\Preferences\com.apple.PowerManagement.plist status=Success
11:389 0:000 using default sleep image name = \private\var\vm\sleepimage
11:427 0:037 sleepimage not found -> Not Found
11:427 0:000 hibernated: no - sign
11:456 0:029 - [24]: 'Recovery'
11:457 0:001 AddLoaderEntry for Volume Name=Recovery
11:506 0:048 - [25]: 'VM'
11:528 0:022 - [26]: 'Preboot'
11:532 0:003 AddLoaderEntry for Volume Name=Preboot
11:535 0:003 Check if volume Is Hibernated:
11:535 0:000 Check sleep image 'by signature':
11:535 0:000 using default sleep image name = \private\var\vm\sleepimage
11:535 0:000 sleepimage not found -> Not Found
11:535 0:000 hibernated: no - sign
11:538 0:003 AddLoaderEntry for Volume Name=Preboot
11:583 0:045 - [27]: 'Hackintosh HD'
11:620 0:037 AddLoaderEntry for Volume Name=Hackintosh HD
11:627 0:007 Check if volume Is Hibernated:
11:627 0:000 Check sleep image 'by signature':
11:648 0:020 read prefs \Library\Preferences\com.apple.PowerManagement.plist status=Success
11:648 0:000 using default sleep image name = \private\var\vm\sleepimage
11:653 0:005 sleepimage not found -> Not Found
11:653 0:000 hibernated: no - sign
11:699 0:046 - [28]: 'Recovery'
11:701 0:001 AddLoaderEntry for Volume Name=Recovery
11:747 0:045 - [29]: 'VM'
11:769 0:022 - [30]: 'Preboot'
11:802 0:033 AddLoaderEntry for Volume Name=Preboot
11:809 0:006 Check if volume Is Hibernated:
11:809 0:000 Check sleep image 'by signature':
11:810 0:000 using default sleep image name = \private\var\vm\sleepimage
11:810 0:000 sleepimage not found -> Not Found
11:810 0:000 hibernated: no - sign
11:814 0:004 AddLoaderEntry for Volume Name=Preboot
11:865 0:051 - [31]: 'Mojave test'
12:069 0:204 AddLoaderEntry for Volume Name=Mojave test
12:123 0:054 Check if volume Is Hibernated:
12:123 0:000 Check sleep image 'by signature':
12:219 0:095 read prefs \Library\Preferences\com.apple.PowerManagement.plist status=Success
12:219 0:000 using default sleep image name = \private\var\vm\sleepimage
12:261 0:041 sleepimage not found -> Not Found
12:261 0:000 hibernated: no - sign
12:290 0:029 - [32]: 'Recovery'
12:293 0:003 AddLoaderEntry for Volume Name=Recovery
12:352 0:058 - [33]: 'VM'
12:374 0:022 Scanning legacy ...
12:374 0:000 === [ AddCustomTool ] =====================================
12:377 0:002 found tool \EFI\CLOVER\tools\Shell64U.efi
12:377 0:000 Checking EFI partition Volume 8 for Clover
12:410 0:033 Found Clover
12:429 0:018 === [ GetEfiBootDeviceFromNvram ] =========================
12:430 0:001 - efi-boot-device-data: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,A0A21095-9D3C-4A4D-BAC3-5DA21F32E6D6,0x64028,0x1D161920)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,84B925A1F081053796F7D30CF3137B66)
12:430 0:000 - Volume: 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,A0A21095-9D3C-4A4D-BAC3-5DA21F32E6D6,0x64028,0x1D161920)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,84B925A1F081053796F7D30CF3137B66)'
12:430 0:000 - LoaderPath: '<null string>'
12:430 0:000 - Guid = A0A21095-9D3C-4A4D-BAC3-5DA21F32E6D6
12:430 0:000 === [ FindStartupDiskVolume ] =============================
12:430 0:000 - Volume: partition = PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,A0A21095-9D3C-4A4D-BAC3-5DA21F32E6D6,0x64028,0x1D161920)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,84B925A1F081053796F7D30CF3137B66)
12:430 0:000 - searching for that partition
12:430 0:000 - found entry 8. 'Boot macOS from Hackintosh HD', Volume 'Hackintosh HD'
12:430 0:000 Boot redirected to Entry 8. 'Boot macOS from Hackintosh HD'
12:430 0:000 DefaultIndex=8 and MainMenu.EntryCount=20
12:713 0:283 GUI ready
15:071 2:357 exit from MainMenu 1
15:072 0:000 Boot option Boot0000 not found
15:072 0:000 === [ StartLoader ] =======================================
15:072 0:000 Finally: ExternalClock=25MHz BusSpeed=100000kHz CPUFreq=3600MHz PIS: hw.busfrequency=100000000Hz
15:072 0:000 Loading boot.efi status=Success
15:136 0:064 GetOSVersion: 10.14.5 (18F132)
15:136 0:000 CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS | CSR_ALLOW_TASK_FOR_PID | CSR_ALLOW_UNRESTRICTED_DTRACE | CSR_ALLOW_UNRESTRICTED_NVRAM | CSR_ALLOW_DEVICE_CONFIGURATION | CSR_ALLOW_ANY_RECOVERY_OS | CSR_ALLOW_UNAPPROVED_KEXTS
15:136 0:000 Filtering KextPatches:
15:136 0:000 - [00]: AppleAHCIPort (External icons patch) :: BinPatch :: [OS: 10.14.5 | MatchOS: All | MatchBuild: All] ==> allowed
15:136 0:000 - [01]: IOAHCIBlockStorage (TRIM Enabler) :: BinPatch :: [OS: 10.14.5 | MatchOS: All | MatchBuild: All] ==> allowed
15:136 0:000 - [02]: AppleUSBXHCIPCI (10.11 change 15 port limit to 30) :: BinPatch :: [OS: 10.14.5 | MatchOS: 10.11.x | MatchBuild: All] ==> not allowed
15:136 0:000 - [03]: AppleUSBXHCIPCI (10.12 change 15 port limit to 20) :: BinPatch :: [OS: 10.14.5 | MatchOS: 10.12.x | MatchBuild: All] ==> not allowed
15:136 0:000 - [04]: AppleUSBXHCIPCI (10.13 change 15 port limit to 20) :: BinPatch :: [OS: 10.14.5 | MatchOS: 10.13.x | MatchBuild: All] ==> not allowed
15:136 0:000 Will not patch boot.efi
15:136 0:000 === [ PatchSmbios ] =======================================
15:136 0:000 insert table 9 for dev 0:0
15:136 0:000 insert table 9 for dev 0:1
15:136 0:000 insert table 9 for dev 19:0
15:136 0:000 Table 11 present, but rewritten for us
15:136 0:000 Trusting SMBIOS...
15:136 0:000 Channels: 2
15:136 0:000 Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23
15:136 0:000 partNum=BLT8G3D1608DT1TX0.
15:136 0:000 SMBIOS Type 17 Index = 0 => 0 0:
15:136 0:000 BANK 0 DIMM0 1600MHz 8192MB
15:136 0:000 partNum=BLT8G3D1608DT1TX0.
15:136 0:000 SMBIOS Type 17 Index = 1 => 2 2:
15:136 0:000 BANK 1 DIMM0 1600MHz 8192MB
15:136 0:000 partNum=BLT8G3D1608DT1TX0.
15:136 0:000 SMBIOS Type 17 Index = 2 => 1 1:
15:136 0:000 BANK 0 DIMM1 1600MHz 8192MB
15:136 0:000 partNum=BLT8G3D1608DT1TX0.
15:136 0:000 SMBIOS Type 17 Index = 3 => 3 3:
15:136 0:000 BANK 1 DIMM1 1600MHz 8192MB
15:136 0:000 mTotalSystemMemory = 32768
15:136 0:000 NumberOfMemoryDevices = 4
15:136 0:000 Type20[0]->End = 0x7FFFFF, Type17[0] = 0x2000
15:136 0:000 Type20[1]->End = 0x17FFFFF, Type17[2] = 0x8000
15:136 0:000 Type20[2]->End = 0xFFFFFF, Type17[1] = 0xC000
15:136 0:000 Type20[3]->End = 0x1FFFFFF, Type17[3] = 0x14000
15:136 0:000 Table 131 is present, CPUType=35
15:136 0:000 Change to: 705
15:136 0:000 === [ PatchACPI ] =========================================
15:136 0:000 Xsdt reallocation done
15:136 0:000 old FADT length=10C
15:136 0:000 SignatureFixup: 0x36 -> 0x0
15:139 0:002 Apply DsdtFixMask=0x00008000
15:139 0:000 drop _DSM mask=0x0000
15:139 0:000 === [ FixBiosDsdt ] =======================================
15:139 0:000 0 replacements
15:140 0:000 NewName HDEF already present, renaming impossible
15:140 0:000 PreCleanup XSDT: count=12, length=132
15:140 0:000 PreCleanup XSDT, corrected XSDT: count=12, length=132
15:140 0:000 === [ ACPIDropTables ] ====================================
15:140 0:000 Drop tables from XSDT, SIGN=DMAR TableID=BDW Length=128
15:140 0:000 Table[11]: DMAR BDW 128 dropped
15:140 0:000 0 replacements
15:140 0:000 0 replacements
15:140 0:000 0 replacements
15:140 0:000 Found OperationRegion(PNVS, SystemMemory, DCBD5F18, ...)
15:140 0:000 0 replacements
15:140 0:000 0 replacements
15:140 0:000 Found OperationRegion(SANV, SystemMemory, DCBD2E18, ...)
15:140 0:000 Found OperationRegion(CCDC, SystemMemory, 80000000, ...)
15:140 0:000 CPUBase=0 and ApicCPUBase=1 ApicCPUNum=8
15:140 0:000 Maximum control=0x24
15:140 0:000 Turbo control=0x28
15:140 0:000 P-States: min 0x8, max 0x28
15:140 0:000 SSDT with CPU P-States and plugin-type generated successfully
15:140 0:000 SSDT with CPU C-States generated successfully
15:140 0:000 Cleanup XSDT: count=14, length=148
15:140 0:000 corrected XSDT count=13, length=140
15:140 0:000 === [ RestSetup macOS ] ===================================
15:140 0:000 EdidDiscovered size=128
15:140 0:000 --- Discovered EDID Table size:128
15:140 0:000 000 | 00 FF FF FF FF FF FF 00 15 C3
15:140 0:000 010 | 41 27 F0 E6 91 01 14 1A 01 04
15:140 0:000 020 | B5 34 21 78 E2 13 B5 B1 4E 35
15:140 0:000 030 | B5 26 09 50 54 A1 08 00 A9 40
15:140 0:000 040 | 81 80 81 40 B3 00 01 01 01 01
15:140 0:000 050 | 01 01 01 01 28 3C 80 A0 70 B0
15:140 0:000 060 | 23 40 30 20 36 00 07 44 21 00
15:140 0:000 070 | 00 1A 1A 36 80 A0 70 38 1F 40
15:140 0:000 080 | 30 20 35 00 07 44 21 00 00 1A
15:140 0:000 090 | 00 00 00 FD 00 17 3F 1A 4E 11
15:140 0:000 100 | 00 0A 20 20 20 20 20 20 00 00
15:140 0:000 110 | 00 FC 00 43 53 32 34 32 30 0A
15:140 0:000 120 | 20 20 20 20 20 20 00 E5
15:140 0:000 ATI injection not set
15:140 0:000 Device 0 deinited
15:140 0:000 setting specified layout-id=1 (0x1)
15:140 0:000 stringlength = 2186
15:140 0:000 CurrentMode: Width=1920 Height=1200
15:140 0:000 Beginning FSInjection
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: CF652C18
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: CF652C18
15:148 0:007 Use origin smbios table type 1 guid.
15:152 0:003 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
15:152 0:000 Extra kext: EFI\CLOVER\kexts\Other\NoVPAJpeg.kext (v.1.0.0)
15:157 0:005 Extra kext: EFI\CLOVER\kexts\Other\FakeSMC_LPCSensors.kext (v.1787)
15:168 0:011 Extra kext: EFI\CLOVER\kexts\Other\FakeSMC_GPUSensors.kext (v.1787)
15:173 0:004 Extra kext: EFI\CLOVER\kexts\Other\FakeSMC_CPUSensors.kext (v.1787)
15:176 0:003 Extra kext: EFI\CLOVER\kexts\Other\FakeSMC_ACPISensors.kext (v.1787)
15:180 0:003 Extra kext: EFI\CLOVER\kexts\Other\WhateverGreen.kext (v.1.3.0)
15:189 0:008 Extra kext: EFI\CLOVER\kexts\Other\AppleIntelE1000e.kext (v.3.3.1)
15:194 0:005 Extra kext: EFI\CLOVER\kexts\Other\Lilu.kext (v.1.3.4)
15:199 0:005 Extra kext: EFI\CLOVER\kexts\Other\FakeSMC.kext (v.1787)
15:204 0:004 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.14
15:204 0:000 Extra kext: EFI\CLOVER\kexts\10.14\AppleALC.kext (v.1.3.8)
15:268 0:064 SetStartupDiskVolume:
15:268 0:000 * Volume: 'Hackintosh HD'
15:268 0:000 * LoaderPath: '<null string>'
15:268 0:000 * DevPath: Hackintosh HD
15:268 0:000 * GUID = A0A21095-9D3C-4A4D-BAC3-5DA21F32E6D6
15:268 0:000 * efi-boot-device: <array><dict><key>IOMatch</key><dict><key>IOProviderClass</key><string>IOMedia</string><key>IOPropertyMatch</key><dict><key>UUID</key><string>A0A21095-9D3C-4A4D-BAC3-5DA21F32E6D6</string></dict></dict></dict></array>
15:269 0:000 Custom boot screen not used because entry has unset use graphics


Ce message a été modifié par marlouin - 8 Jul 2019, 12:44.


--------------------
Mac Studio 2022 (M1 max, 32 cœurs graphiques, 64go)

Hackintosh : {OpenCore} GA-Z97X-Gaming 3 | i7 4790 | Radeon RX 580 | Big Sur + Linux Mint 21 + Mojave
Hacks pour les amis-famille : {OpenCore} Lenovo Thinkpad T470, {Clover} Lenovo Thinkcentre M73, {OpenCore} Lenovo X1 Yoga (gen 2)
Go to the top of the page
 
+Quote Post
polyzargone
posté 8 Jul 2019, 13:14
Message #90


Macbidouilleur d'Or !
*****

Groupe : Modérateurs
Messages : 13 720
Inscrit : 11 May 2006
Membre no 60 938



Il faut que tu identifies les 3 volumes Preboot via diskutil list et qu'ensuite, tu montes chaque volume via cette commande :

Ex :

Code
MacBook-Optimus:~ polyzargone$ diskutil list
/dev/disk0 (internal, physical):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *500.1 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:       Microsoft Basic Data Stockage                100.0 GB   disk0s2
   3:                  Apple_HFS MacStuff                100.0 GB   disk0s3
   4:           Linux Filesystem                         30.0 GB    disk0s4
   5:                 Linux Swap                         7.9 GB     disk0s5
   6:                  Apple_HFS Time Machine            197.9 GB   disk0s6
   7:                 Apple_APFS Container disk4         63.4 GB    disk0s7

/dev/disk1 (internal, physical):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *250.1 GB   disk1
   1:                        EFI EFI                     209.7 MB   disk1s1
   2:                 Apple_APFS Container disk3         50.1 GB    disk1s2
   3:                  Apple_HFS MacDATA                 100.7 GB   disk1s3
   4:       Microsoft Basic Data WinDATA                 98.7 GB    disk1s4

/dev/disk2 (internal, physical):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *256.1 GB   disk2
   1:                        EFI EFI                     209.7 MB   disk2s1
   2:                  Apple_HFS Macintosh HD            149.5 GB   disk2s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk2s3
   4:         Microsoft Reserved                         16.8 MB    disk2s4
   5:       Microsoft Basic Data Windows 10              105.7 GB   disk2s5

/dev/disk3 (synthesized):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      APFS Container Scheme -                      +50.1 GB    disk3
                                 Physical Store disk1s2
   1:                APFS Volume macOS Mojave            40.1 GB    disk3s1
   2:                APFS Volume Preboot                 44.9 MB    disk3s2
   3:                APFS Volume Recovery                512.4 MB   disk3s3
   4:                APFS Volume VM                      2.1 GB     disk3s4

/dev/disk4 (synthesized):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      APFS Container Scheme -                      +63.4 GB    disk4
                                 Physical Store disk0s7
   1:                APFS Volume macOS Catalina - Don... 27.4 GB    disk4s1
   2:                APFS Volume Preboot                 79.2 MB    disk4s2
   3:                APFS Volume Recovery                524.8 MB   disk4s3
   4:                APFS Volume VM                      2.1 GB     disk4s4
   5:                APFS Volume macOS Catalina          10.6 GB    disk4s5


Pour la 1ère partition Preboot (celle du disk3)

Code
sudo diskutil mount /dev/disk3s2 && open /Volumes/Preboot


Pour la 2ème (celle du disk4) :

Code
sudo diskutil mount /dev/disk4s2 && open /Volumes/Preboot


À l'intérieur de chaque volume Preboot, tu auras un dossier nommé par un UUID. C'est cet UUID qui différenciera les volumes Preboot de tes partitions Mojave.

NB : Dans chaque UUID, il y aura deux "path" à définir : 1 pour le Preboot et 1 pour le Preboot Installer. Je te laisse suivre le tuto en post #27 pour créer tes entrées.

En ce qui te concerne, les "Volumes" de tes entrées sont les suivants :

Code
10:958 0:022 - [22]: 'Preboot'
11:528 0:022 - [26]: 'Preboot'
11:769 0:022 - [30]: 'Preboot'


Citation
7:169 0:000 - [22]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(4,GPT,390C2C9D-9E66-42EA-B813-68B22FF9B305,0x1C62FE228,0xB90DC60)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,E982F251E8D5D640AED9B89B5BB8EA4B)


Citation
7:169 0:000 - [26]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,A0A21095-9D3C-4A4D-BAC3-5DA21F32E6D6,0x64028,0x1D161920)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,984D960C57502343A24EA70B48EDC1FD)


Citation
7:169 0:000 - [30]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0xFFFF,0x0)\HD(4,GPT,B79C9629-C844-4977-B9D1-688F70F1C35D,0x1CBF2A0C8,0x5CE1DC0)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,E5716B324AF90C40B8901247B7618A0D)


--------------------
Un MacmacOS 10.15.7 MacBook Air mi-2012 Core i5 1,7 GHz Intel HD 4000 SSD 64 Go
Des Hacks Asus Z170-P - Core i7 6700 3,40 GHz - Sapphire RX 6600 XT 8 Go - 32 Go DDR4 Gigabyte H110M-S2H - Core i5 6600 3,30 GHz - Zotac GTX 1060 6 Go - 32 Go DDR4 Gigabyte GA-H97-HD3 - Core i5 4570 3,20 GHz - MSI GTX 650 Ti 2 Go - 16 Go DDR3 Acer Aspire V3 772G Core i5 4210M 2,60 GHz - Intel HD 4600 + GTX 850M 2 Go (désactivée) - 16 Go DDR3 Dell Latitude e7470 Core i5 6300U 2,40 GHz - Intel HD 520 - 16 Go DDR4 Dell Latitude 7490 Core i7 8650U 1,90 GHz - Intel UHD 620 - 16 Go DDR4 Dell Latitude e7440 Core i7 4600U 2,10 GHz - Intel HD 4400 - 16 Go DDR3 HP Elite 8300 USFF - Core i7 3770S 3,90 GHz - Intel HD 4000 (+ quelques autres...)

Politique vis à vis des outils automatisés et des distributions - Guide d'installation - Tutoriels - Lexique et utilité des Kexts - FAQ Générale du Hackintosh - FAQ des Bootloaders - FAQ des Bootflags - FAQ des problèmes les plus courants - FAQ sur les Mises à jour Majeures sur Hackintosh
Go to the top of the page
 
+Quote Post

5 Pages V  < 1 2 3 4 5 >
Reply to this topicStart new topic
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :

 



Nous sommes le : 28th March 2024 - 10:32