HPLIP sur MACOSX, ...?

[imoopsy]

Bonjour,
Depuis quelque jours maintenant j'ai installé le driver SANE TWAIN ( qui permet de scanné via processing ) seulement lorsque je tape dans le terminal " sane-find-scanner " , j'ai un message de type

Code

# sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x03f0 [HP], product=0x5711 [Photosmart C4100 series]) at libusb:001:006-03f0-5711-00-00
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

  # You may want to run this program as root to find all devices. Once you
  # found the scanner devices, be sure to adjust access permissions as
  # necessary.

En gros mon scanner n'a pas était trouvé, donc je dois téléchargé un genre de driver qu'ils appelent backend compatible sane pour une HP PHOTOSOMART all in one C4100... J'ai donc trouvé un driver qui conviendrai sur le site de sane , il s'apelle HPLIP ( http://hplipopensource.com/hplip-web/index.html )MALHEUREUSEMENT NON COMPATIBLE MAC OS X seulement LINUX ! mais j'ai trouvé un peu plus tard ces explications sur un site parlant de lancé HPLIP sur MACOS X apparament ca fonctionnerai !
Seulement il y a quelques infos que je n'ai pas compris ( celle souligné ) mais en tout cas j'ai tapé l'intégralité des commandes.
SEULE PROBLEME , la dernière partie souligné ou il dise de tapé :

Code

./configure -prefix=/usr -disable-pp-build LDFLAGS="-L/opt/local/lib"
CPPFLAGS="-/opt/local/include"
make
make install DESTDIR=/tmp/myhplip

Et bien quand je tape ca, le terminal ne reagi pas, il me dit " no such file or directory "

Code

macpook-bro-2:~ Nathalie$ ./configure -prefix=/usr -disable-pp-build LDFLAGS="-L/opt/local/lib" CPPFLAGS="-/opt/local/include"
-bash: ./configure: No such file or directory

INSTRUCTIONS

The next HPLIP release (0.9.9) will at least compile and install on Mac
OS
X 10.4.4. I did not test HPLIP on OS X, but this completes my goal for
this HPLIP release. The Mac community can test HPLIP and provide us
feedback.

In order to get HPLIP to compile I had to stub out USB
bulk_write/bulk_read calls since these calls do not go through libusb.
This means the current HPLIP USB support will be limited to device
discovery only. USB printing/scanning/hp-toolbox will not work. In
theory
all HPLIP JetDirect support should work.

In order to get full HPLIP USB support working on the Mac the
bulk_write/bulk_read calls need to be converted the Mac USB IOKit.

Here some notes on how and what was tested.

1. Download install xcode to get the GNU tools. Get *.dmg at
developer.apple.com/tools/xcode . Double click on dmg to install.

2. Download install darwinports a BSD rpm type tool. Don't bother with
the
dmg, do a tar ball install instead.

3. Get the latest autotools. "sudo port install autoconf", "sudo port
install automake", "sudo port install", "sudo port install libtool",
"sudo
port install pkgconfig"

4. Get libusb. "sudo port install libusb"

5. Get libjpeg. "sudo port install jpeg"

6. Now the we can build and install with following commands.

./configure -prefix=/usr -disable-pp-build LDFLAGS="-L/opt/local/lib"
CPPFLAGS="-/opt/local/include"
make
make install DESTDIR=/tmp/myhplip

J'aimerai beaucoup que quelqu'un puisse m'aidé car dans mon projet j'ai besoin de scanné sur processing , je suis sous macos X !
Je ne sais pas d'ou vient le problème étant un peu une newbie, mais cela fait 3 jours que je cherche des infos et a chaque fois ca bloque.

Merci

Ce message a été modifié par imoopsy - 3 Mar 2013, 13:59.

[imoopsy]

Alors le sudo make ne fait plus d'erreur j'ai donc lancé un sudo make install

Et maintenant :

Code

test -z "/tmp/myhplip/var/log/hp" || mkdir -p /tmp/myhplip/var/log/hp
chgrp "lp" -R /tmp/myhplip/var/log/hp
chgrp: -R: No such file or directory
make[1]: *** [install-dist_hplip_LogDATA] Error 1
make: *** [install-am] Error 2

J'ai ce genre d'erreur,
je sens qu'on ai proche !