MAMP PRO 6.8, Comment accéder au site sur un réseau en local ? |
Bienvenue invité ( Connexion | Inscription )
MAMP PRO 6.8, Comment accéder au site sur un réseau en local ? |
20 Mar 2023, 15:26
Message
#1
|
|
Macbidouilleur d'Or ! Groupe : Membres Messages : 1 895 Inscrit : 14 Nov 2001 Membre no 1 288 |
Hello tout le monde.
J'ai installé MAMP PRO 6.8 sur un Hackintosh fonctionnant (parfaitement) sous Catalina 10.15.7. Le site Wordpress qui fonctionne avec MAMP PRO 6.8 est accessible avec l'URL : https://mmyae:8890/ L'adresse IP du Hackintosh est : 192.168.1.44 Le partage de fichier est activé sur le Hackintosh et fonctionne parfaitement, tout comme le partage d'écran, et ce avec tous les ordis (MacOS et PC/Windows) en réseau filaire. Parmis les ordis en réseau filaire : — J'ai un Macmini M1 sous Ventura 13.2.1 — J'ai un second Macmini M1 sous Monterey 12.6.1 Aucun de ces deux Macmini M1 ne sont en mesure d'accéder au site Wordpress fonctionnant sur la Hackintosh. J'ai testé les URL suivantes : — https://192.168.1.33:8890 — http://192.168.1.33:8890 — https://mmyae:8890 — http://mmyae:8890 — hhtps://mmyae.local — hhtp://mmyae.local La hotline de MAMP PRO n'est pas en mesure de m'aider. Dan (de la Hotline) m'a écrit ceci : Hello, Thanks for your message. To access the site on the computer where MAP PRO is installed from other Mac computers on the same network, you can follow these steps: Ensure all Mac computers are connected to the same local network (Wi-Fi or wired). On the computer with MAP PRO installed, note down its local IP address: a. Click on the Apple logo in the top-left corner of the screen. b. Select "System Preferences." c. Click on "Network." d. Choose the active network connection (Wi-Fi or Ethernet) from the list on the left side. e. The local IP address will be displayed on the right side of the window. Note down this IP address. Enable screen sharing or file sharing on the computer with MAP PRO installed: a. Click on the Apple logo in the top-left corner of the screen. b. Select "System Preferences." c. Click on "Sharing." d. Check the box next to "Screen Sharing" or "File Sharing" depending on your needs. On the other Mac computers, you can now access the site on the computer with MAP PRO installed: a. Press Command (⌘) + K to open the "Connect to Server" window in Finder. b. In the "Server Address" field, enter the local IP address of the computer with MAP PRO installed, like this: vnc://[IP_ADDRESS] for screen sharing or smb://[IP_ADDRESS] for file sharing. Replace [IP_ADDRESS] with the actual IP address you noted down earlier. c. Click "Connect." d. You may be prompted to enter the username and password of the account on the computer with MAP PRO installed. Enter these credentials and click "Connect" again. You should now be able to access the site on the computer with MAP PRO installed from the other Mac computers on your network. If you need to access the site remotely from outside the local network, you may need to use a VPN or set up port forwarding on your router. This can be more complex and requires additional configuration. -- Den Customer Support Team J'ai effectué les manipulations préconisées. Tout est OK. Mais le site est inaccessible. Pouvez-vous m'aider ? Ce message a été modifié par gilloo35 - 20 Mar 2023, 15:56. -------------------- ***************************
Site Pro : Make Me Your Alter Ego, ou MMYAE, le système d'édition numérique pour les jeux de rôles. *************************** Hack réalisé avec OpenCore et l'aide de Mac Arthur • i9 7940X 14 Core / 128 Go 3000 MHz / AMD Radeon RX 5700XT 8 Go • 1 Carte Samsung SSD 970 EVO 1 To pour Windows / 5 Samsung SSD 970 EVO 4 To pour Catalina et mes fichiers • Carte mère ASUS Prime X299-A / Alimentation Corsair RM850X *************************** |
|
|
21 Mar 2023, 19:39
Message
#2
|
|
Macbidouilleur d'Or ! Groupe : Membres Messages : 1 895 Inscrit : 14 Nov 2001 Membre no 1 288 |
C'est officiel dans le sens, ou la hotline de MAMP PRO demeure silencieuse depuis 5 jours pour tenter de solutionner mon problème.
C'est officiel depuis que je me suis rendu compte que rien ne fonctionne avec MAMP PRO 6 et que tout fonctionnait parfaitement avec la version 5, et que la Hotline de MAMP PRO n'a émis aucune remarque à ce sujet. -------------------- ***************************
Site Pro : Make Me Your Alter Ego, ou MMYAE, le système d'édition numérique pour les jeux de rôles. *************************** Hack réalisé avec OpenCore et l'aide de Mac Arthur • i9 7940X 14 Core / 128 Go 3000 MHz / AMD Radeon RX 5700XT 8 Go • 1 Carte Samsung SSD 970 EVO 1 To pour Windows / 5 Samsung SSD 970 EVO 4 To pour Catalina et mes fichiers • Carte mère ASUS Prime X299-A / Alimentation Corsair RM850X *************************** |
|
|
26 Mar 2023, 11:31
Message
#3
|
|
Macbidouilleur d'Or ! Groupe : Membres Messages : 2 497 Inscrit : 4 Oct 2002 Membre no 3 936 |
C'est officiel dans le sens, ou la hotline de MAMP PRO demeure silencieuse depuis 5 jours pour tenter de solutionner mon problème. C'est officiel depuis que je me suis rendu compte que rien ne fonctionne avec MAMP PRO 6 et que tout fonctionnait parfaitement avec la version 5, et que la Hotline de MAMP PRO n'a émis aucune remarque à ce sujet. OK donc ce n'est pas du tout officiel Une idée qui m'est venue : tu n'aurais pas un firewall applicatif type Littlsnitch par hasard ? |
|
|
Nous sommes le : 23rd May 2024 - 14:58 |