configurer un ftp sur drobo

[pv_bain]

bonjour,

voila, j'ai acheté un Drobo avec un Drobo share qui fonctionne sous linux (quelle version, je ne sais pas)

j'ai téléchargé et installé les apps dropbear pour avoir un acces SSH, ainsi que pure-ftpd.

sur le forum Drobo, qui n'est malheureusement accessible qu'avec un numero de serie d'un des produits drobos, il y a quelqu'un qui a mis un tuto qui semble assez complet selon les autres utilisateurs, mais assez brouillon.

voilà, je viens poster ici, parce que comme je l'ai dit plus haut, le forum n'est pas accessible, donc tres peu de reponses, or j'en ai besoin assez vite.

mon probleme, est au niveau de la ligne que j'ai souligné en rouge, le terminal me renvoi la réponse suivante :

nohup: appending output to 'nohup.out'
nohup: cannot run command '/pure-ftpd': No such file or directory

comment resoudre le probleme ?

voici donc le post complet de mountainbiker :

mountainbiker
http://www.pureftpd.org/project/pure-ftpd
and especially section "PER-USER CHROOT() RULES".

[mac /]
$ ssh [email protected]
[email protected]'s password: giveit2me

Welcome to Embedded Linux
_ _
| ||_|
| | _ ____ _ _ _ _
| || | _ \| | | |\ \/ /
| || | | | | |_| |/ \
|_||_|_| |_|\____|\_/\_/

A Data Robotics Product.

http://www.drobo.com/
/>
BusyBox v1.1.2 (2007.06.18-15:03+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

~ $ rm ConnectedDrobos/
~ $ addgroup ftpgroup
~ $ more /etc/group
root:x:1:root
user:x:500:
ftpgroup:x:501:
~ $ adduser -h /root/ConnectedDrobos/./ -G ftpgroup ftpuser
adduser: Failed to execute 'passwd', you must set the password for 'ftpuser' manually
~ $ more /etc/passwd
root:$1$$J8Ji9LlFpF1EaoKKlkeGO/:0:0:root:/root:/bin/sh
nobody:x:99:99:Nobody:/:/sbin/nologin
user::500:500:Linux User,,,:/home/user:/bin/sh
ftpuser:x:501:501:Linux User,,,:/root/ConnectedDrobos/./:/bin/sh
~ $ passwd ftpuser
Changing password for ftpuser
Enter the new password (minimum of 5, maximum of 8 characters)
Please use a combination of upper and lower case letters and numbers.
Enter new password: ftpuser
Bad password: too simple.

Warning: weak password (continuing).
Re-enter new password: ftpuser
Password changed.
~ $ cd /mnt/DroboShares/Drobo/DroboApps/pure-ftpd/
/mnt/DroboShares/Drobo/DroboApps/pure-ftpd $ ls
auto_config nohup.out pure-ftpd-start.sh pure-ftpd.pid
name pure-ftpd pure-ftpd-stop.sh
/mnt/DroboShares/Drobo/DroboApps/pure-ftpd $ rm auto_config
/mnt/DroboShares/Drobo/DroboApps/pure-ftpd $ ./pure-ftpd-start.sh unused /mnt/DroboShares/Drobo/
/mnt/DroboShares/Drobo/DroboApps/ /mnt/DroboShares/Drobo/Music/
/mnt/DroboShares/Drobo/Movies/ /mnt/DroboShares/Drobo/My Stuff/
/mnt/DroboShares/Drobo/DroboApps/pure-ftpd $ ./pure-ftpd-start.sh unused /mnt/DroboShares/Drobo/Music /mnt/DroboShares/Drobo/DroboApps/pure-ftpd
/mnt/DroboShares/Drobo/Music
/mnt/DroboShares/Drobo/DroboApps/pure-ftpd
~ $

Note on the pure-ftpd-start.sh parameters:
1 - is unused in the shell script
2 - mount directory this creates a symlink called ConnectedDrobos in the root directory of home that points to this mount directory
3 - pure-ftp application directory where pure-ftpd is located


Open browser
enter the URL: ftp://root:[email protected]/ or ftp://[email protected]/ (and be prompted for user/password)
or
ftp://ftpuser:[email protected]/ or ftp://[email protected]/ (and be prompted for user/password)

Now close the FTP browser window.

Set your router up to do port forwarding of your dynamic ip to your DroboShare (mine is at 10.0.1.199).

If you don't know your dynamic IP, check http://whatismyip.com/. For this example, lets say mine is 123.456.789.123.

Once you rebooted your router, you should be able to login again from the outside, e.g., ftp://[email protected]/
#######################################################
# Written by: mountainbiker (Drobo Forum)
# Version: 20081122-1532
# Purpose: .profile for use on the DRI DroboShare
#
# Note:
# Don't forget to mkdir $FTP/ftp
#
#######################################################

# Prompt
#
# Black 0;30 Dark Gray 1;30
# Blue 0;34 Light Blue 1;34
# Green 0;32 Light Green 1;32
# Cyan 0;36 Light Cyan 1;36
# Red 0;31 Light Red 1;31
# Purple 0;35 Light Purple 1;35
# Brown 0;33 Yellow 1;33
# Light Gray 0;37 White 1;37

# red='\e[0;31m'
RED='\e[1;31m'
# blue='\e[0;34m'
BLUE='\e[1;34m'
# cyan='\e[0;36m'
# CYAN='\e[1;36m'
# green='\e[0;32m'
# GREEN='\e[1;32m'
NC='\e[0m' #no color

PS1="\n[\[${RED}\]\u\[${NC}\]@\[${RED}\]\h \[${BLUE}\]\w\[${NC}\]]\n\$ "
# Environment Variables
export PS1
export DROBO=/mnt/DroboShares/Drobo
export TORRENT=$DROBO/DroboApps/ctorrent-dnh3.3.2/ctpackage
export FTP=$DROBO/DroboApps/pure-ftpd
export PROFILE=$HOME/.profile

# Shell options
set -o vi # won't set to on for me on the DroboShare; use "set -o" to check

# Aliases
alias c="clear"
alias e="vi $PROFILE;l"
alias l=". $PROFILE"
# ...
alias pureftp="cd $FTP"
alias ll="ls -al"
alias start_ftp="_ftp_prefix;./pure-ftpd-start.sh x $FTP/ftp $FTP;_ftp_postfix"
alias start_music_ftp="_ftp_prefix;./pure-ftpd-start.sh x $DROBO/Music $FTP;_ftp_postfix"
alias stop_ftp="$FTP/pure-ftpd-stop.sh"
alias start_torrent="$TORRENT/ctorrent -D 200 -U 10 -E 1.5 $TORRENT/torrents/*.torrent"
alias torrent="cd $TORRENT"
alias ..="cd ..;"
alias ....="cd ..;cd ..;"
alias _ftp_prefix="rm /root/ConnectedDrobos/;rm $FTP/auto_config;cd $FTP"
alias _ftp_postfix="cd - > /dev/null"
[DroboShare ~]
/$ more /etc/passwd
root:$1$$J8Ji9LlFpF1EaoKKlkeGO/:0:0:root:/root:/bin/sh
nobody:x:99:99:Nobody:/:/sbin/nologin
user::500:500:Linux User,,,:/home/user:/bin/sh
ftpuser:$1$$lEGWZx3wSut2Y0BtV6pzq1:501:501:Linux User,,,:/root/ConnectedDrobos/./:/bin/sh

[DroboShare ~]
$ more /etc/group
root:x:1:root
user:x:500:
ftpgroup:x:501:
[DroboShare ~]
$ ls $FTP
auto_config name pure-ftpd pure-ftpd-stop.sh
ftp nohup.out pure-ftpd-start.sh pure-ftpd.pid

[DroboShare ~]
$ stop_ftp

[DroboShare ~]
$ start_ftp
/mnt/DroboShares/Drobo/DroboApps/pure-ftpd/ftp
/mnt/DroboShares/Drobo/DroboApps/pure-ftpd
nohup: appending output to 'nohup.out'

[DroboShare ~]
$ ls -l
.ash_history
.profile
ConnectedDrobos -> /mnt/DroboShares/Drobo/DroboApps/pure-ftpd/ftp
DontPlaceFilesHere.txt
Look at http://www.dyndns.com/

DynDNS URLs are set to the IP you set at setup (under the free service). Therefore, to ensure the named DynDNS URL works, you need to verify that it matches your dynamic IP provided by your ISP. You can check your IP quickly using http://whatismyip.com/
This function I use in my bash (not Droboshare) profile:

function ip() { # Get IP adresses.
IPWIRED=$(/sbin/ifconfig en0 | egrep -o 'inet [0-9.]+' | egrep -o '([0-9]{1,3}.){3}[0-9]{1,3}')
MACWIRED=$(/sbin/ifconfig en0 | egrep -o 'ether [0-9a-f:]+' | egrep -o '([0-9a-f]{2}{5}[0-9a-f]{2}')
IPWIFI=$(/sbin/ifconfig en1 | egrep -o 'inet [0-9.]+' | egrep -o '([0-9]{1,3}.){3}[0-9]{1,3}')
MACWIFI=$(/sbin/ifconfig en1 | egrep -o 'ether [0-9a-f:]+' | egrep -o '([0-9a-f]{2}{5}[0-9a-f]{2}')
IPWORLD=$(curl -s http://www.whatismyip.com/automation/n09230945.asp | egrep -o '([0-9]{1,3}.){3}[0-9]{1,3}')

echo -e -n "${RED}Local (wired) :${NC} ${IPWIRED:-Not connected}\n"
echo -e -n "${RED}MAC (wired) :${NC} ${MACWIRED:-Not connected}\n"
echo -e -n "${RED}Local (WiFi) :${NC} ${IPWIFI:-Not connected}\n"
echo -e -n "${RED}MAC (WiFi) :${NC} ${MACWIFI:-Not connected}\n"
echo -e -n "${RED}ISP :${NC} ${IPWORLD:-Not connected}\n"
}
On your Mac side, make an entry like

10.0.1.199 droboshare

into /etc/hosts. Note: 10.0.1.199 is the IP assigned by your router, so the IP maybe static or dynamic (DHCP).

You'll then be able to use it to do shorthand things like

ssh root@droboshare to SSH into the DroboShare

http://droboshare:8080/ to access the DroboShare Admin Utility
The router will need to do port mapping, which passes the “live” ISP IP address to your local IP address. These IPs could be dynamic or static. Typically, both are dynamic, but your router may assign the same dynamic local IP address to your DroboShare, unless you change your networks configuration.

Note: 10.0.1.199 is the dynamic local IP address, which could potentially change; therefore, this will have to reflect any such change.